Lockwood Velocity leversets buying guide
The Lockwood Velocity is a series of door levers on a large 63mm round rose, designed in Australia for the Australian market. This collection holds the Velocity Element L3 lever in three functions, passage, privacy and dummy, and three finishes, matte black, brushed satin chrome and chrome. The Velocity series is built to be quick to fit: the lever set arrives pre-assembled, it fixes with a twist and tighten action and the fixings hide beneath a removable rose trim. This guide explains what the Velocity is, how the Element L3 lever measures, what each function does, how the quick fixing works, how the rose suits a retrofit, how to choose a finish and how to plan a whole house. For other Lockwood products, see Lockwood, and for other levers, see interior door levers and passage lever sets.
What the Velocity series is
Velocity is a Lockwood door handle series built around a large, flat round rose. Velocity is a contemporary collection of levers on a rose to suit a wide range of home designs, with an attractive yet unobtrusive rose design. The series comes in six lever designs and three finishes. This collection holds the Element L3 design.
The Velocity series sets a new benchmark in ease and speed of installation. That is the point of the series. Every set is made so that a fitter, or a keen owner, can put it on a door in a few minutes. For a house with many doors, the time saved adds up.
The Element L3 lever
The Element L3 is a straight, modern lever. The lever is 122mm long with a 54.5mm projection from the door face and a finger clearance of 47.5mm. The finger clearance is the gap between the underside of the lever and the rose, the space your fingers need to grip the lever. At 47.5mm there is room for a full hand.
The lever is made from solid zinc die-cast. Die-cast zinc is a dense alloy cast in a mould, which gives a solid feel and a smooth surface that takes a finish well. A lever of 122mm gives a comfortable arm and fits a standard door without looking oversized.
The 63mm rose
The rose is a flat round plate, 63mm across and 12.5mm deep. It is larger than a standard 54mm rose, and that size has a purpose. The rose fits 50mm or 54mm diameter holes, to suit both retrofit and common door preparations. A large rose covers the hole and any marks or damage around its edge, which is common on a door that has had an older lock.
Because the rose is flat and plain, it sits close to the door and does not catch on clothing. The fixings are concealed beneath a removable rose trim, so the face is clean with no visible screws.
Passage set
The passage set is for internal connecting doors. It latches the door shut and does not lock. Use it for hallways, living rooms, kitchens, laundries and any door where privacy is not needed. The box holds two handles, a latch, a strike plate, fixing screws and spindles, so the door can be fitted straight from the box.
Privacy set
The privacy set is for lockable spaces such as bathroom and toilet doors. It latches the door and adds an inside lock for the person in the room. It suits bathrooms and toilets. Use it for bathrooms, ensuites, toilets and bedrooms where a lock is wanted. See privacy door levers for privacy levers from all makers.
Dummy lever
The dummy lever is a half set for cupboard and wardrobe doors where consistent styling is wanted. It is a fixed lever with no latch. You use it on a door that closes with a catch, so the cupboard has the same handle as the doors around it. See dummy levers for dummy levers from other makers.
Because the dummy is a half set, one lever goes on one face of the door. Order two if you want a lever on both faces.
The twist and tighten fixing
It has a simple twist and tighten fixing action, with a lever set that arrives pre-assembled. Instead of lining up separate parts and driving screws, you place the pre-assembled lever and rose on the door, twist and tighten, and it locks into place. The process is faster and less fiddly than a conventional set.
Check the instructions for your set. They show the order of fixing and how to remove the rose trim to reach the fixings. The installation instructions can be downloaded from the product page.
Door thickness
The door thickness range for hinged doors is 32mm to 45mm. That covers most internal doors in Australian homes. Measure the thickness of the door edge. If your door is thinner than 32mm or thicker than 45mm, choose another set.
The range is for hinged doors, so the set is made for swing doors. For a sliding or cavity door, look at cavity slider hardware.
Retrofit and standard preparations
The rose fits 50mm or 54mm diameter holes. A 54mm hole is the standard preparation for a bored lock in Australia, and 50mm is common on older doors. That means the Velocity suits both a new door and a replacement of an older set. In a retrofit, remove the old set, measure the hole, and if it is 50mm or 54mm the Velocity will fit. The large rose also covers marks left by an older, larger plate.
If the hole is larger than 54mm, the rose may not cover it, and a larger backplate set may be better.
Finishes
The Element L3 comes in matte black, brushed satin chrome and chrome. Matte black is flat and strong, and it suits a modern house and black window frames. Brushed satin chrome is soft and neutral and hides fingerprints. Chrome is bright and cool and suits a bathroom with chrome tapware.
Choose the finish to match the hinges, stops and other hardware in the house. A consistent finish through the house makes the doors look like a set. See hinges and Lockwood door stops for pieces in matching finishes.
Choosing between the three finishes
Matte black, brushed satin chrome and chrome each suit a different house. Matte black pairs with black window frames, black tapware and dark joinery. Brushed satin chrome pairs with stainless steel appliances, brushed nickel tapware and pale interiors. Chrome pairs with polished chrome tapware and bathrooms.
Look at the finishes in the light of the room. A chrome lever reflects its surroundings, so it can look different in a bright hall and a dim bedroom. A matte lever absorbs light and looks the same in both. Brushed satin chrome sits in between. If you are unsure, choose brushed satin chrome, which is the most forgiving.
Using the Velocity with other Lockwood products
The Velocity sits with other Lockwood products in the same finishes. The Lockwood Element collection includes more designs, and Lockwood sells door stops, deadbolts and other hardware that match the finish. A set of Velocity levers with a matching Lockwood door stop behind each door gives a coordinated door. See Lockwood door stops for stops in matching finishes.
Checking the door before you buy
Before you order, check three things on each door. Measure the thickness of the door edge and confirm it is between 32mm and 45mm. Measure the existing hole and confirm it is 50mm or 54mm. Check the condition of the timber around the hole, since a split or soft edge needs repair before any lever will hold. If the door passes all three, the Velocity will fit.
Take a photo of the old set before you remove it, so you can check the position of the latch and the direction of the bevel when you fit the new one. Note which side of each door the privacy lock must face.
Fitting a Velocity set
Read the instructions first. Fit the latch into the door edge, with the angled face towards the closing direction. Pass the spindle through the latch. Fit the lever and rose on each side with the twist and tighten action, and test the lever. Fit the strike plate on the frame and check that the latch meets it cleanly. Replace the rose trim to hide the fixings.
For a privacy set, check that the lock control faces the room. Test the lock from both sides.
Caring for the lever
Wipe with a soft damp cloth and dry. Avoid abrasive pads and strong chemical cleaners, which can mark a finish. Matte black shows fingerprints more than satin finishes. Check the fixings from time to time. Because the fixings sit under the rose trim, remove the trim gently if you need to tighten them.
Common mistakes to avoid
The first mistake is using a passage set on a bathroom. The second is ordering one dummy lever where two are needed. The third is ignoring door thickness. The fourth is forgetting that the rose fits 50mm or 54mm holes only. The fifth is mixing finishes through the house. The sixth is losing the removable rose trim during fitting.
A short list avoids all six: function, count, thickness, hole, finish and trim.
Our recommendation
For a house of standard doors that wants quick, tidy fitting, choose the Velocity Element L3 in the finish that suits the house. Use passage for connecting doors, privacy for bathrooms and toilets, and dummy for cupboards and wardrobes. Match the finish to the hinges and stops.
Check the thickness and hole size on a few doors, order in one batch and fit with the instructions. Then the levers will go on fast and look consistent.
Questions about the Lockwood Velocity
What is the Lockwood Velocity?
It is a series of levers on a 63mm round rose, designed in Australia, with a quick twist and tighten fixing.
What door thickness does it suit?
It suits hinged doors 32mm to 45mm thick.
What hole size does the rose fit?
The rose fits 50mm or 54mm diameter holes.
What is in the box?
The passage set holds two handles, a latch, a strike plate, fixing screws and spindles.
What finishes does the Element L3 come in?
Matte black, brushed satin chrome and chrome.