Martec Albatross II ceiling fans buying guide
The Martec Albatross II is a large DC ceiling fan made in 1650mm, 1830mm and 2130mm spans. It comes in matte black, matte white, brushed nickel or walnut, with or without an integrated LED light. People who search for the Albatross usually want the same things answered: how big each size is, how much air it moves, what the light does, how it is controlled, and whether it can go outside. This guide answers those from the specification of each size, with the maker's own product data filling gaps, and general advice about fans alongside. Where figures differ, the text flags it.
Albatross II sizes and airflow
The spans are 1650mm (65 inch), 1830mm (72 inch) and 2130mm (84 inch). The maximum air movement is 15,600 cubic metres an hour on the 65 inch, 17,650 on the 72 inch and 20,200 on the 84 inch. These are maximum figures at the top speed, and a large fan usually runs at its lowest speed most of the time. A fan over 54 inch (137cm) suits a larger square room of about 5 by 5 metres or more. Every span here is above that, so this is a range for big rooms, not for a small bedroom. See large fans for the wider set and medium size ceiling fans for smaller spans.
Which one for which room
The size bands differ slightly, so the rule is more useful than any one number. 12 to 20 square metres pairs with a 52 to 60 inch fan, and an area over 20 to 25 square metres works better with a large fan or two fans. A covered alfresco of 20 to 30 square metres takes 56 inch, and an area above 30 square metres, or a high raked ceiling, takes 80 to 84 inch. A fan for every 20 square metres of floor is a fair rule. A long rectangular space does better with several 52 inch fans than one very large fan.
- 1650mm: a generous living room or main bedroom, and the smallest span in the range.
- 1830mm: an open-plan living and dining area, or a large covered patio.
- 2130mm: a very large room, a high room with a flat ceiling, or a large alfresco.
Centre the fan over the seating or the middle of the room, away from tall walls, because the air has farther to travel from a high mount.
Albatross II specification
- Motor: DC, 55 watts at maximum, with an input of 220 to 240 volts.
- Construction: aluminium blades with a steel body.
- Speeds: six speeds plus sleep and breeze modes.
- Reverse function: yes, for summer cooling and winter circulation.
- Ceiling pitch: 0 degrees, so a flat ceiling.
- Overall height: 330mm and 390mm without a light, and 350mm and 410mm with one.
- Downrods: two are in the box, and the ceiling drop runs from 1.28 m to 2.18 m.
- Control: remote, with Wi-Fi control through the Smart Life app on the Wi-Fi versions.
- Light version: integrated 32 watt LED, up to 3,300 lumens, 2700K to 6000K, dimmable.
Treat the Albatross II as a flat-ceiling fan, with a ceiling pitch of 0 degrees. Check the figure for your model with us and the electrician before fitting the fan to any ceiling that is not flat. The motor is 55 watts, the blades are aluminium and the control is a remote with an app.
Light or no light
The light version has a 32 watt LED of up to 3,300 lumens, switchable from 2700K to 6000K and dimmable. Warm white of about 2700K to 3000K suits bedrooms and lounges and neutral white of about 4000K suits task areas. On a large fan in a large room the light can serve as the main light source. A fan light near downlights can cause a strobe effect as the blades pass in front of them, and many models are sold as light or no-light versions only, so decide before you buy. The light adds 20mm to the overall height. See ceiling fans with lights and ceiling fans without lights.
Ceiling height and drop
Blades must hang at least 2.1 metres above the floor, with 2.4 to 2.7 metres recommended as the best mounting height. The overall heights are 330mm to 410mm. Arithmetic from those figures: a ceiling of about 2.43 metres is the lowest that keeps the shortest version above 2.1 metres, and about 2.51 metres is the lowest for the tallest. A standard 2.4 metre ceiling is just under the minimum for every version, so this fan suits a ceiling above 2.5 metres. The electrician should confirm the figure against the downrod length chosen.
The ceiling drop is flexible, from 1.28 m to 2.18 m, and two downrods come in the box. A long drop suits a high ceiling because the fan sits lower in the room and the air reaches people. Ceilings of about 2.7 to 3 metres or higher may need an extension rod. See ceiling fans for high ceilings. For a low ceiling the better choice is a fan built for it, such as those on ceiling fans for ceilings under 2.7m or low profile fans.
Indoor and covered outdoor use
The aluminium blades are designed for both indoor and covered outdoor areas, and for large areas and covered outdoor applications. The specification is IP20, and no other IP rating is published. IP20 is the lowest protection rating, and it means dry indoor use. Covered areas call for at least IP44. The two do not match, so treat IP20 as the figure to work from and check with us before fitting the fan on a patio or alfresco. Even in a covered space, sideways rain and sea air can reach a fan near the edge of a roof, and so can mist or condensation. For fans rated for outdoors see outdoor ceiling fans, and for sea air coastal rated fans.
DC motor, speeds and controls
DC motors are now the most common type and are more efficient than AC. They offer up to seven speeds and work on a normal supply through an internal rectifier. DC fans use less electricity than AC on average. The Albatross II has six speeds plus a sleep mode and a breeze mode. A breeze mode varies the fan speed over time. The remote carries these settings, and the Wi-Fi versions add control through an app. See DC motor fans and smart ceiling fans.
Finishes and style
The finishes are matte black and matte white, brushed nickel, and walnut. White blends into a light ceiling and black contrasts. Match the finish to the other metalwork and the ceiling colour in the room. See black ceiling fans, white ceiling fans, brushed nickel ceiling fans and walnut ceiling fans. Colour does not change how much air a fan moves.
Installation and care
A hard-wired ceiling fan must be installed by a licensed electrician, and wall-switch fans cannot legally be fitted without one. The electrician checks the ceiling support, the wiring, the switch position and the circuit protection. A large fan puts more load on the fixing, so the mounting point should be rated for the weight and the movement. Wipe the blades every few weeks. A fan that wobbles is louder and wears faster, and a balance kit corrects it. Have the fan inspected early if it hums or wobbles.
Matching the fan to the light in the room
A fan with a light changes how a room is lit. The 2700K setting gives a warm, yellow white that suits evening living areas and bedrooms, and the 6000K setting gives a cool white nearer to daylight. Neutral white of about 4000K suits kitchens and workspaces. Switchable colour temperature lets one fan cover both uses, and variable dimming lets the light drop low at night. A separate control for the light lets you change the light without changing the fan speed. If the room already has downlights, the strobe effect described above is the thing to check by running the fan at several speeds with the lights on.
Mounting a large fan safely
A fan of this span has long blades and a heavy motor, so the fixing matters more than on a small fan. The electrician checks that the ceiling joist or support can carry the weight and handle the movement of the fan. Outdoor beams in pergolas may need bracing, which is a reason to have the structure checked before the fan is bought for an alfresco. The blades should clear walls and beams, and any hanging light, by a sensible margin. A long downrod gives the blades more room from a sloped or beamed ceiling than a short one. Keep clear of tall walls on one side, because a fan placed close to a wall pushes air into it instead of across the room.
Short answers on the Albatross II
- Which size is the biggest? The 2130mm, or 84 inch, with a maximum airflow of 20,200 cubic metres an hour.
- Does it have a light? Some versions do and some do not. The light versions have a 32 watt LED of up to 3,300 lumens.
- Can I control it from my phone? The Wi-Fi versions work through the Smart Life app, and every version has a remote.
- Does it work in winter? Yes, it has a reverse function, and the clockwise setting moves warm air without a draught.
- Is it suitable for a low ceiling? The overall height of 330mm to 410mm needs a ceiling above about 2.5 metres to keep the blades above 2.1 metres, so a fan made for low ceilings is the better route.
- Can I mount it on a sloped ceiling? The pitch is 0 degrees, so confirm with us and the electrician first.
Related collections
For every style see ceiling fans. By brand, Martec ceiling fans. Other Martec ranges worth a look are Avoca, Elite and Metro.