Walnut ceiling fans buying guide
A walnut ceiling fan brings a warm, dark timber tone to a room, usually paired with a black or white body. The first question to settle is what the walnut is. On every fan in this collection the blade material is ABS plastic or aluminium, so the walnut is a finish on the blades and not solid timber. That matters for how the fan behaves and how to care for it. This guide explains what to expect from a walnut finish and how it pairs with a room. It then goes through size, light, motor and ceiling, and ends with installation and care.
Is a walnut ceiling fan real wood?
Not here. Many blades that look like wood are plastic, and that is the case for the fans in this collection. The Eglo Seacliff has UV-resistant ABS blades with a light walnut finish on a black steel body. The Martec Polo, Impact and Elite pair a matt white or matt black body with walnut-finish blades, and all three are built from steel and ABS. The Martec Albatross II has aluminium blades on a steel body in a walnut finish. The specification of each states the blade material, and that is the line to read if the material matters to you.
The distinction has practical consequences. Timber blades can absorb moisture and swell or warp in humid or damp conditions, and timber is the usual blade material to avoid outdoors. ABS and aluminium do not behave that way, which is why walnut-finish blades on ABS suit a wider range of rooms than solid timber. No blade material has been shown to improve airflow. Blade shape, pitch and motor quality do that. So the walnut finish is a design choice and not a performance one.
Choosing a walnut fan for the look
Walnut adds warmth and texture. A walnut-look finish suits rooms that need more contrast, while a natural pine finish suits lighter spaces. Timber looks suit modern and coastal interiors, as well as Scandinavian and minimalist ones. Those are design views, and the practical test is how the walnut pairs with the rest of the room. The collection offers three pairings.
- A black body with walnut blades, on the Eglo Seacliff, Martec Impact and Martec Elite. The dark body ties in with black tapware, window frames or light fittings, and the walnut warms it.
- A white body with walnut blades, on the Martec Polo: the white body blends into a light ceiling, while the walnut shows as a feature.
- A full walnut look on the aluminium blades of the Martec Albatross II, for a large room.
Black is a bold finish that contrasts with a light ceiling and white is one that blends into it, which is a useful way to choose the body. Colour does not change how much air a fan moves. See black ceiling fans and white ceiling fans for the body colours, and woodgrain ceiling fans, oak ceiling fans and bamboo ceiling fans for other timber looks.
The walnut fans in this collection
- Eglo Seacliff, 44 and 52 inch: DC, drawing 16 watts on the 44 inch and 28 watts on the 52 inch. It has six speeds and three UV-resistant ABS blades on a steel low profile canopy, with a drop of 234mm, and it suits flat ceilings only. It has a remote and is for indoor locations around the home. The lit versions have a 15 watt LED of 1,750 lumens that switches between 3000K and 5000K, with 4000K in between.
- Martec Polo, 1320mm: DC at 36 watts, built from steel and ABS and made for indoor use. The maximum ceiling pitch is 12 degrees and the overall height is 335mm, and the lit version has a 2,500 lumen dimmable LED.
- Martec Impact, 1320mm: DC at 33 watts, built from steel and ABS and made for indoor use. It takes 10 degrees of pitch and stands 313mm overall, and the lit version has a 2,160 lumen dimmable LED.
- Martec Elite, 1220mm: DC at 36 watts, built from steel and ABS and made for indoor use. It takes 10 degrees of pitch and stands 310mm overall without a light and 340mm with one. It has eight comfort settings, and the lit version has a 1,885 lumen dimmable LED.
- Martec Albatross II, 1650mm, 1830mm and 2130mm: DC at 55 watts, with aluminium blades on a steel body. It has six speeds plus sleep and breeze modes and moves up to 20,200 cubic metres an hour, and it suits flat ceilings only. The overall height is 330mm to 390mm without a light and 350mm to 410mm with one, and the lit versions have an integrated LED of up to 3,300 lumens.
Choosing the size
The right size depends on the room, not the finish. A 52 inch (132cm) fan is the standard size, 48 inch (122cm) suits smaller rooms and over 54 inch (137cm) suits larger square rooms of about 5 by 5 metres or more. By area, 6 to 12 square metres takes 48 to 52 inch, 12 to 20 square metres takes 52 to 60 inch, and over 20 square metres takes 60 inch and larger. The Seacliff at 44 inch suits a small room. The Elite and the 52 inch Seacliff suit a bedroom, the Polo and Impact suit a standard living room, and the Albatross II is for a large open space. A long room does better with several 52 inch fans than one very large fan.
Ceiling height, pitch and clearance
Blades must hang at least 2.1 metres above the floor, and Martec fans want at least 300mm from the ceiling and about a metre from any wall, ideally with the fan centred, with 300mm as the bare minimum wall clearance. Subtract the fan's height or drop from your ceiling height to find the blade height. On a 2.4 metre ceiling, the Seacliff's 234mm drop leaves the blades at about 2.17 metres, while the Albatross II at 330mm or more leaves them at about 2.07 metres or lower, so the Albatross II needs a taller ceiling. Those figures are arithmetic from the heights, and the electrician should confirm them.
The maximum ceiling pitch is on each specification: 0 degrees on the Seacliff and Albatross II, meaning a flat ceiling only, 10 degrees on the Impact and Elite, and 12 degrees on the Polo. Fans generally handle about 10 degrees of tilt and steeper slopes need a raked ceiling kit and a longer rod. For other ceiling heights see ceiling fans for high ceilings and low profile fans.
With a light or without
Most of the walnut fans come with and without a light. The lit versions give 1,750 lumens on the Seacliff, 1,885 on the Elite, 2,160 on the Impact, 2,500 on the Polo and up to 3,300 on the Albatross II, and the lights are dimmable, with a switchable colour temperature on the Seacliff. Warm white of about 2700K to 3000K suits bedrooms and lounges. A fan near downlights can strobe, many models are sold as light or no-light versions only, and a light adds height, so check the figure for the version you buy. See ceiling fans with lights and ceiling fans without lights.
Motor, speeds and controls
Every walnut fan here is DC. DC motors tend to be quieter and offer more speed settings, work on a household supply through an internal rectifier, and are generally more efficient than AC. The Seacliff has six speeds, the Elite eight comfort settings, and the Albatross II six speeds plus sleep and breeze modes. Each comes with a remote. Several of the Martec ranges also work with Wi-Fi. See DC motor fans and smart ceiling fans.
Walnut with the other finishes in the room
A fan is one of several finishes on show. A few pairing rules help. Black suits rooms that already have black hardware, window frames or fittings, and matte black fans work with dark accents. White blends into a white or light ceiling. Silver finishes such as satin nickel and titanium suit contemporary decor. Bronze and brass suit traditional settings and dark woods. Walnut sits comfortably with dark woods and with black, and it adds warmth to a white or grey scheme. Check how the walnut tone compares with other timbers in the room, such as a floor, a table or cabinetry. A red-toned timber can clash with a cool walnut, so hold a sample against the existing wood where you can.
For the other finishes, see brass ceiling fans, bronze ceiling fans and brushed nickel ceiling fans.
The Martec Albatross II in walnut
The Albatross II is the large fan in this collection and deserves a closer look. It is a DC fan in 1650mm, 1830mm and 2130mm, with aluminium blades on a steel body and a 55 watt motor. It has six speeds plus sleep and breeze modes, and airflow reaches 20,200 cubic metres an hour. Its maximum ceiling pitch is 0 degrees, so it needs a flat ceiling, and its overall height is 330mm to 390mm without a light and 350mm to 410mm with one. 56 to 60 inch fans suit areas over 35 square metres, and 80 to 84 inch fans suit above 30 square metres or under high raked ceilings, so the larger sizes here suit a big open room. Because it is a large fan, the fixing matters: the mounting bracket must support the fan's size and weight, and the electrician should check the ceiling or beam. See Martec Albatross II ceiling fans and large fans.
Caring for a walnut-finish fan
Wipe the blades every few weeks. Dust shows on every colour, and a dark finish shows it differently, not never. Matt finishes hide fingerprints better than gloss, and check the care notes before using a cleaner on a walnut finish. A fan that wobbles is louder and less efficient, and a balance kit corrects it. Have the fan inspected early if it hums, wobbles or runs slowly.
Installation
A ceiling fan is a fixed electrical appliance, and hard-wired fans must be installed by a licensed electrician. Fitting a wall-switch fan without a licence is illegal. The fans in this collection are for indoor use, so keep them indoors. For a fan to hang outside, see outdoor ceiling fans.
Related collections
For every style see ceiling fans. By brand, Martec ceiling fans.