Skip to content

Momo Aspen Door Hardware

0 Items

Whoops, there are none available in your area

View all products

Momo Aspen door hardware buying guide


Aspen covers a 600mm door pull handle and a dummy lever set, across dark brushed brass, bronze, matte black, dull brushed nickel and brushed satin brass.

Pull handle vs dummy lever

The 600mm pull handle suits an entry or feature door needing a substantial grip, while the dummy lever is fixed rather than operating, used on the inactive leaf of a double door or a purely decorative internal application.

Comparing to Momo's other ranges

For a similar pull handle format with a knurled texture, see Momo Belgravia. Browse Momo's full range, or see door hardware for other brands.

Frequently Asked Questions

What is the difference between a lever handle and a knob

A lever handle is operated by pressing down on an elongated arm, it is accessible for people with limited hand strength and is the most common door handle type in Australian homes. A door knob requires gripping and turning, which some users find less accessible. Under the Disability Discrimination Act, lever handles are recommended in accessible homes and are increasingly standard in new builds.

What is an entrance handle set?

An entrance handle set is a door handle set designed specifically for the front or entry door of a home. It includes a keyed cylinder lock integrated into the handle or separate lockset, providing external security. Entrance sets are available in a range of styles from contemporary to traditional and must be rated for external use, exposed to the elements, with weather-resistant finishes.

What is a dummy door handle?

A dummy handle is a non-functional door lever or knob that is decorative only, it does not operate a latch or lock. Dummy handles are used on doors that don't require a latch (such as double doors where one door is fixed, wardrobe doors that slide or swing without a latch, or decorative cabinet doors). They give the door the appearance of a complete handle set without the mechanical function.

What is a passage handle set?

A passage handle set includes two lever handles connected by a spindle that operate a latch, allowing the door to be opened from either side without a lock. Passage sets are used on internal doors where privacy is not required: hallways, living areas, home offices, and children's bedrooms. They are the most commonly used internal door handle set in Australian homes.

What is a privacy handle set and where is it used?

A privacy handle set includes a locking mechanism that can be engaged from inside the room, typically a simple push-button or turn-snib and can be unlocked from outside in an emergency using a small pin or coin. Privacy handles are used on bathroom, toilet, and bedroom doors where privacy is required but a keyed lock is not necessary.

What handle do I need for a sliding door?

Sliding doors require a specific type of handle, typically a recessed flush pull, a finger pull, or a surface-mounted sliding door pull. Because a sliding door doesn't have a hinge pivot point, standard lever handle sets don't apply. Flush pulls sit recessed in the door surface and are ideal for cavity (pocket) sliding doors. Edge pulls are mounted on the leading edge of the door for easy gripping.

Can I use the same handle brand for both internal and external doors?

Many Australian handle brands, including Zanda, Lockwood, and Lane, offer coordinated range of interior and exterior handles that share the same design language and finish, allowing a consistent look from the front door through to every internal door and room in the home.