Skip to content

Momo Handles Belgravia Door Hardware

0 Items

Whoops, there are none available in your area

View all products

Momo Belgravia door hardware buying guide


The Momo Belgravia is a solid brass range with a knurled texture and a brushed clasp detail, made for entrance doors and cupboards. This collection holds the Belgravia knurled entry pull in 496mm and 600mm lengths and the Belgravia knurled dummy lever, in bronze, brushed satin brass, matte black, dull brushed nickel and dark brushed brass. This guide explains what makes the Belgravia look the way it does, how the knurled texture and the clasp detail work, how to read length, centres and projection on the pulls, how the dummy lever differs, how the concealed fixing and back to back installation work, which door each piece suits and how to plan an entry or a run of cupboards in Belgravia. For the wider Momo range, see Momo architectural door hardware, Momo Bellevue door hardware and Momo Aspen door hardware.

What the Belgravia design is

The Belgravia is the most decorative of the three Momo door ranges. Where the Bellevue is slim and architectural and the Aspen is flat faced and plain, the Belgravia adds texture and a small piece of detail. It combines grandeur and sophistication, with a knurled texture and a brushed clasp that add elegance and make a lasting first impression.

The pull is a straight bar, so the shape is simple. The character comes from the surface and the clasp. That keeps it from looking fussy while still giving it more presence than a plain bar.

The knurled texture

Knurling is a pattern of fine crossed or parallel grooves cut into metal, the kind you see on the grip of a tool. On the Belgravia, it covers the surface of the bar and the lever. The effect is a matte, tactile finish that catches light in small points and gives a firm grip.

The texture has a practical side. It improves the hold in a wet or gloved hand and hides fingerprints. It also gives the surface depth, so the bar looks richer than a smooth one in the same finish. A knurled bar suits a front door that wants character.

The brushed clasp detail

A clasp is a band that wraps around the bar near the end, like a strap holding it to the post. On the Belgravia the clasp is brushed, meaning it has a fine linear grain, while the bar around it is knurled. The contrast between the two textures is the signature of the range.

The clasp also suggests the way the bar is held. It gives the pull a crafted, almost hand-made look, in keeping with the solid brass. It is a small detail, but it is what sets the Belgravia apart from the other Momo ranges.

Solid brass

The Belgravia is made from solid brass, which is dense, strong and takes a finish well. A solid brass bar has weight in the hand, which gives a front door pull a sense of quality. It does not rust, which suits an entry door that faces weather. The pull is large and suited to entrance doors.

The finishes sit over the brass: bronze, brushed satin brass, matte black, dull brushed nickel and dark brushed brass. The same body takes each colour.

The 496mm entry pull

The 496mm Belgravia pull has 416mm fixing centres, a 54mm projection and a 30mm section. It suits doors 35 to 50mm thick. The 30mm section is a good size for the hand, broader than a slim bar and not as heavy as the 600mm. The 54mm projection leaves room for fingers behind the bar without standing out far.

The 496mm length suits a standard front door, a side door or a door where the bar should be present but not dominant. The 416mm centres are the distance you give the door maker.

The 600mm entry pull

The 600mm Belgravia pull has 480mm fixing centres, a 75mm projection and a 40mm section. It also suits doors 35 to 50mm thick. The 40mm section is broad and heavy, the projection is generous and the length gives a strong vertical line. It suits a wide, tall or heavy front door, a pivot door or a feature entry.

The 75mm projection is the greatest of the Momo pulls, so check the clearance behind the open door. A door stop protects the wall. See door stops for stops that match the finish.

Concealed fixing and back to back

Unique engineering conceals the fixing screws and allows back to back fixing. You need to purchase two pulls for back to back installation. A concealed fixing means no screw heads show on the face, which keeps the knurled surface unbroken. Back to back means a pull on each face, bolted together through the door.

The pull is sold singly. For a handle on both faces, order two. For a handle on the outside only, with a lever or knob inside, order one. The pull is supplied with installation hardware.

The Belgravia dummy lever

The Belgravia dummy lever carries the same knurled texture and brushed clasp as the pull. It is a fixed lever for cupboards, wardrobes and pantry doors that do not latch. It is 170mm long with a 62mm dimension and 41mm fixing centres, for doors 35 to 50mm thick. The box holds two lever sets, enough for a lever on each face of one door.

At 170mm it is the longest of the Momo dummy levers, a substantial handle with real presence. Use it on a tall wardrobe door or a feature cupboard. Fit a catch inside, since a dummy lever has no latch. See dummy levers for other dummy styles.

Choosing between Belgravia, Bellevue and Aspen

The three Momo ranges suit different houses. The Bellevue is slim, with a plain, lined or knurled surface and a restrained look. The Aspen is flat faced with a stepped edge and a low projection. The Belgravia is broad, knurled and clasped, and the boldest of the three. If you want the front door to be a feature, choose the Belgravia. If you want it quiet, choose the Bellevue or the Aspen.

Whichever range you choose, keep to one on a given door, and one finish across the entry.

Which doors suit the Belgravia

The Belgravia suits solid timber and solid core doors that are 35 to 50mm thick and can carry a heavy bar. It suits wide front doors, pivot doors and feature entries. It is less suited to a narrow door of 700mm or less, where a 600mm bar would crowd the leaf. It is not made for a thin hollow core door or a door that is not stiff enough to carry a long pull without flexing.

It looks best on a door with some presence of its own: a deep colour, a strong timber grain or a panelled or slatted face. On a very plain flush door it adds the interest the door itself lacks.

Finishes

Bronze and dark brushed brass are dark and warm and suit timber and heritage doors. Brushed satin brass is a soft gold. Matte black is flat and strong. Dull brushed nickel is a soft silver. On the knurled surface, the finish takes on a texture. A dark finish hides the pattern a little, and a lighter finish shows it clearly. Look at the finish in place if you can.

Door thickness

The Belgravia suits doors 35 to 50mm thick. Measure the door at the edge. A door thinner than 35mm may not hold the fixings, and a door thicker than 50mm may need longer ones. Most solid timber entry doors fall within the range.

Planning an entry in Belgravia

Fit the Belgravia pull on the outside of the front door, a lever or knob on the inside in a matching finish, hinges in the same finish and a lock suited to the door. Set the bar so the middle of the grip is at about hip height, clear of the lock. Mark the centres with a template, 416mm or 480mm apart, and drill square through the full thickness.

Test fit before you tighten, and fit after the door is painted or sealed. A pull does not lock the door, so add a lock kit in the same finish.

Planning cupboards in Belgravia

Use the dummy lever on the cupboards beside the entry, in the same finish as the pull. Set all the levers at the same height and distance from the edge, using one reference line. Fit a catch inside each door. Because the lever is long, make sure there is room for it to sit without catching on a neighbouring door.

Care

Wipe with a soft damp cloth and dry. Avoid abrasive pads, polishes and strong chemical cleaners. The knurled texture collects dust, so brush it lightly with a soft brush. Near the sea, rinse salt off from time to time. Dark finishes develop a soft character with use.

Common mistakes to avoid

The first mistake is ordering one pull where a handle is needed on both faces. The second is confusing overall length with centres. The third is ignoring the 75mm projection of the 600mm pull. The fourth is overlooking the thickness range. The fifth is mixing finishes across hinges and pull. The sixth is forgetting a catch behind the dummy lever.

A short list avoids all six: faces, centres, projection, thickness, finish and catch.

Our recommendation

For a front door that wants a statement, choose the 600mm Belgravia pull in a dark or warm finish. For a standard door, choose the 496mm. For cupboards and wardrobes beside the entry, choose the Belgravia dummy lever in the same finish. Order two pulls if the door needs a handle on both faces.

Measure the centres, check the thickness and match the finish. Then the entry will have character from the first touch.

Questions about Momo Belgravia door hardware

What is the Momo Belgravia?

A solid brass range with a knurled texture and a brushed clasp detail, in entry pulls and a dummy lever.

What are the centres of the Belgravia pulls?

The 496mm pull has 416mm centres and the 600mm pull has 480mm centres.

What door thickness does it suit?

These suit doors 35 to 50mm thick.

Do I need two pulls?

For a handle on both faces of the door, yes. You need two pulls for back to back installation.

What finishes does it come in?

Bronze, brushed satin brass, matte black, dull brushed nickel and dark brushed brass.

Frequently Asked Questions

What types of cabinet handles are available for bathroom vanities?

Bathroom vanity cabinet handles come in bar pulls, knob handles, T-bar pulls, cup pulls, and edge pulls (for handleless drawer looks). Bar pulls in lengths of 96mm, 160mm, and 256mm are among the most popular in Australian bathrooms for their clean, contemporary appearance. Knobs are a classic choice for traditional or Hamptons-style bathrooms. The Blue Space stocks handles from brands including Momo Handles and Zanda in finishes to suit every style.

What size cabinet handle do I need?

Australian handles are generally measured by "hole centres", the distance between the two screw holes, measured centre to centre. Common sizes include 96mm and 128mm for kitchens, and 160mm becoming increasingly popular in modern builds. As a general guide, the 1/3 rule works well: your handle length should be roughly one-third the width of the door or drawer. So a 600mm-wide drawer suits a handle around 160–200mm, while smaller drawers under 300mm work best with a shorter 70–100mm pull or a knob.

Should I choose cabinet handles or knobs?

Both have their place, and many homes use a mix of the two. Handles offer a larger, more comfortable grip, making them ideal for drawers and heavier daily use. Knobs are simple to install, easy to clean, and suit cabinet doors or lower-traffic areas where a subtler look is preferred. A common approach is to use handles on drawers and knobs on doors, giving your kitchen, bathroom or laundry a considered, tailored finish.

Can I use the same cabinet handles in my kitchen, bathroom and laundry?

Yes, and many homeowners do this to create a seamless, considered flow throughout the house. That said, it's important to factor in environment: bathrooms and laundries are exposed to higher humidity and moisture, so finishes like solid brass with a PVD coating, stainless steel, or quality powder-coated options will hold up better than raw or untreated materials over time.

How do I replace cabinet handles without drilling new holes?

Measure your existing hole centres by checking the distance between the centre of each screw hole, then choose a new handle with matching hole centres. If you'd like to switch to a different style or size, options like backplates, edge pulls, or handles designed to cover old holes make it possible to update your look without redrilling your cabinetry.

How do I match cabinet handle finishes with my tapware and appliances?

For a cohesive, well-designed home, cabinet handles are best chosen to complement your tapware, sink and appliance finishes. Matte black handles pair beautifully with matte black tapware for a contemporary look, while brushed nickel or brushed brass options suit warmer, Hamptons-style spaces. If your appliances are stainless steel, brushed nickel or stainless handles will tie the room together. It's worth considering your whole space, kitchen, bathroom and laundry, for a consistent finish throughout the home.