Otti Byron Vanities Buying Guide
The Otti Byron is a wall hung vanity in Natural Oak, Black Oak, Woodland Oak fluted and Sable Walnut, with a choice of ceramic, solid surface or marble tops, in widths from 600mm to 1800mm. It takes its name from Byron Bay, and it has an organic feel, a casual style and a designer look. It is part of the Otti vanities and cabinets range. This guide puts the facts that decide the order in one place: the two finish families, what each top takes in tap holes, what comes with the vanity and what is sold separately, the sizes, and what to check with your installer.
Two finish families
The Natural Oak and Black Oak cabinets have a moisture resistant plywood carcase with a melamine finish. The Woodland Oak fluted cabinets have moisture resistant plywood with a wood veneer finish, a fluted panel with vertical grooves, and the same fluted finish inside the cabinet. The Sable Walnut cabinet has a laminate finish with a ceramic top. Cabinets are fitted with DTC hinges and runners that close softly, and the fluted version uses Hettich runners.
The fluted front uses light and shadow to add depth to a flat face, and the grooves catch the light differently through the day. Byron uses a soft edge finger pull, so there is no handle to interrupt the rhythm of the grooves. For other ribbed fronts, see fluted vanities.
Choosing between flat and fluted
The slimline Byron in Natural Oak or Black Oak has a flat face and a slim ceramic top, which suits a clean, modern bathroom. The fluted Woodland Oak adds texture and warmth, and it suits a room with a natural palette, such as white or cream tiles, a timber shelf and woven accessories. Sable Walnut is the deeper, richer option. Black Oak is the strongest, and it needs good light to avoid feeling heavy. Pick the front by the room: flat for a plain room that wants a calm cabinet, fluted for a room that wants a feature.
Choose the top
The slimline ceramic top is gloss white with a moulded basin and overflow, and it comes with a 12 o'clock tap hole. The stone tops come in Pure White, Matte White and Cloudy Carrara solid surface, and in Natural Carrara marble. There is also a version with a Natural Carrara marble top and an undermount basin included, in Woodland Oak. Natural Carrara is a natural stone product, pre-sealed, that may need regular upkeep to prevent staining. Marble can etch and stain even when sealed, and care varies by stone, so follow the instructions for the specific top.
Tap holes depend on the top
The tap hole rule is different for each top, so choose the tap before the top. The ceramic top has a 12 o'clock tap hole only. The solid surface tops are semi-drilled in three places on the underside, so the tap hole is chosen on site with a 50mm diamond drill bit, and because the holes are not visible from above, the top also suits no tap hole. The Natural Carrara marble tops come with no tap hole, for wall-mounted tapware. The fluted ceramic version has a 32mm waste hole.
Check the basin against the top before you order, because a stone top that has been cut cannot be changed. Confirm the tap and waste positions first, and keep the basin back from the front edge of the top so there is room to use it. See taps and mixers.
What comes with it
On the ceramic top version the waste is sold separately, and it needs a basin waste with an overflow. On the stone and marble tops, the basin and waste are sold separately, so choose a basin from the above counter basins. The undermount version includes an undermount basin, and the waste and tapware are sold separately; see undermount basins for other sizes. Read the inclusions on the product page for the finish and top you choose, because they differ between versions.
Drawers and storage
Byron cabinets have soft-closing drawers. The slimline, stone and fluted versions use full extension Hettich runners, and the fluted version has two soft-closing drawers. Put daily items in the top drawer and keep towels and bottles in the lower one. Check the clearance behind the drawers when you plan the water supply fittings, because fittings inside the cabinet can stop a drawer closing. On a double basin the drawers work around two wastes.
Sizes and bowl layout
The slimline ceramic version comes in 600mm, 750mm, 900mm, 1200mm and 1500mm, and the stone and fluted versions add 1800mm. The fluted range also has a 1200mm double basin. The product pages send you to the technical drawings in the gallery for each size, so use those to get the depth, the height and the drawer layout before you fix the rough-in.
A powder room or a narrow ensuite takes 600mm. A standard or guest bathroom takes 750mm to 900mm. A shared bathroom or a master ensuite takes 1200mm to 1800mm. Test the footprint before you order. Mark the width and depth on the floor with masking tape, and if you have to turn sideways to pass, the vanity is too wide, too deep or both. Measure depth from the finished wall to the front of the vanity, not only to the cabinet face.
The size pages list each width: 400mm to 600mm, 750mm, 900mm, 1200mm, 1500mm and 1800mm. For two basins see double vanities.
Which size suits which room
The 600mm Byron suits a powder room, with one user and a short wall. A 750mm or 900mm suits a guest bathroom or a small main bathroom with a single basin, and 900mm leaves room for a tray beside the bowl. A 1200mm suits a main bathroom with a long wall and a single basin with generous bench. A 1500mm or 1800mm suits a shared bathroom, and the 1200mm fluted double basin gives two users a bowl each in a smaller footprint. Measure your wall first, and leave 50mm to 100mm at each end so the cabinet does not wedge between walls.
Styling a Byron bathroom
The Byron suits a relaxed, natural room. Pair Woodland Oak with white or cream tiles, a plaster or limewash wall, a woven basket for towels and a plant on the sill. Pair Natural Oak with pale grey tiles and chrome or brushed nickel tapware for a clean, modern look. Pair Black Oak with white tiles and black tapware for contrast, and make sure the room has good light so the cabinet does not swallow the space. Sable Walnut sits well with warm stone, brass tapware and a mirror with a thin metal frame. Keep the palette to three tones: the cabinet, the tile and one metal.
Choosing a basin for a stone top
The solid surface and marble tops come without a basin, so the basin is yours to choose. An above counter basin sits on the bench, adds about 100mm to 170mm to the working height, and shows its full shape, so it becomes a feature. A shallow bowl keeps the rim low, and a tall vessel bowl needs a taller spout. Check the basin's width against the top, and leave at least 50mm of bench on each side so the rim sits clear of the edge. An undermount basin sits below the stone, so water wipes from the bench into the bowl. The Natural Carrara top with an undermount basin included is the simplest way to get that layout.
Fit and walkway
Allow about 700mm to 750mm clear in front of the vanity to stand and move, and keep at least 450mm from the centre of the toilet pan to the side of the vanity. Take the depth from the technical drawing for your size and do the walkway sum: subtract the depth from the depth of the room along the line you walk, and check that at least 700mm is left. Have the product on site and verify all measurements against it before roughing in, so you set the plumbing positions from the vanity you receive, not from the drawing.
Height and the wall
A wall hung vanity is set on site, about 800mm to 900mm to the top, by the installer from the users, the basin type, the waste position and the wall structure. The wall carries the whole load, so fix the cabinet into solid framing or reinforced backing, and plan the plumbing early. A stone top and a 1500mm or 1800mm unit weigh more, and a licensed installer should assess the wall. See wall hung vanities.
Fixing and sealing
Fix the cabinet to support nogs fitted between the studs. The nog must be wider than the vanity, and the cabinet is secured to at least two studs or nogs behind the plasterboard and tiling. The wall must be plumb and flat, and the cabinet packed out if it is not. Run a thin bead of non-acidic silicone on every cabinet edge that meets the wall or floor, tighten wastes by hand only, and extend the tiles behind the cabinet. Bathroom furniture should sit at least 300mm from wet areas, the materials resist moisture but are not waterproof, and the room needs ventilation.
Mirror and lighting
A mirror looks best slightly narrower than the vanity, about 50mm to 100mm in from each side, hung about 100mm to 200mm above the bench or basin rim so it clears the tap handles. A double basin takes one mirror over each basin or one wide mirror. A fluted front throws a soft shadow, so light from both sides of the mirror shows the grooves at their best. See mirrors.
Looking after the vanity
Wipe the cabinet with a soft cloth and a weak solution of non-abrasive detergent, and dry any spill. Wipe away pooled water around the basin, and avoid strong chemical cleaners and abrasive pads. On a fluted front, dust collects in the grooves, so run a microfibre cloth or a soft brush along them and wipe with a pH-neutral cleaner. Check the silicone each month and reseal any that has lifted, and run the extraction fan after a shower, because steam is the main enemy of a timber look.
More sizes and styles
For a white cabinet, see white bathroom vanities. Every size and style is in the bathroom vanity guide.