Skip to content

Phoenix Shower Rose Range

0 Items

Whoops, there are none available in your area

View all products

Phoenix Shower Rose Range Buying Guide


A shower rose is the head of a fixed overhead shower, and this collection holds Phoenix roses on their own, rose and arm sets, and high-rise sets where the arm adds height. The roses come from ranges including Vivid, Cromford, Wiltern, Nuage, Lexi, Ormond, Oxley and NX, in round and square shapes from about 155mm to 300mm, so there is a match for most Phoenix mixers and bathroom styles.

Should I buy a rose only or a rose and arm set?

Choose a rose only if you are keeping your existing arm. Phoenix roses such as the 230mm Vivid round rose fit standard half inch shower arms, but check that your arm can carry the rose's weight and holds it far enough from the wall. Choose a rose and arm set if you are replacing the arm too, or want both in one design and finish. Sets include the Vivid 400mm arm with a 230mm round rose, the Lexi 400mm arm with a 200mm square rose, and the Cromford arm and rose.

What is a high-rise shower arm and rose?

A high-rise set uses an upswept arm that lifts the rose above the wall outlet. It is the fix when the outlet sits too low to place a rose at the usual 2000 to 2100mm above the floor. Options include the Vivid MKII high-rise with a 250mm rose and 363mm arm reach, the Cromford high-rise with a 210mm rose, the Wiltern at 446mm overall height, and the Ormond and NX upswept sets.

Which Phoenix rose range suits my bathroom?

  • Vivid and Vivid Slimline: slim, modern round roses; the Vivid Slimline SS is 316 marine grade stainless steel for coastal and outdoor use.
  • Cromford: pared-back with heritage detail.
  • Wiltern: Art Deco fluting on a 220mm rose.
  • Nuage: soft sculptural curves, including powder-coated matte white.
  • Ormond and Oxley: LuxeXP swirl spray with a 250mm rose.
  • NX Iko, Orli, Cape and Quil: angular rain heads on upswept arms.
  • Nostalgia: a vintage exposed shower set for new installations with separate hot and cold inlets.

What size rose is right for my water pressure?

Phoenix roses list an operating pressure of 150 to 500 kPa. A 200 to 230mm rose suits most homes, while 250 to 300mm rain heads need good pressure to feel full. To check yours, time a 10 litre bucket under the shower; under a minute points to good pressure. Ratings run from 3 to 5 star WELS, so check the flow on the exact version if you have an instantaneous gas hot water system.

Can I adjust the angle of the rose?

Several can. The Nuage, Wiltern and Cromford roses have an adjustable head angle, so you can aim the spray away from the screen or suit taller users without changing the arm. A fixed rose has no joint, which keeps it simple.

How do I clean a shower rose?

Wipe the rose after use and rub the nozzles with a finger. For a deeper clean, soak the head in a bag of warm water with mild dishwashing liquid for 30 to 60 minutes, then scrub the holes with a soft toothbrush and rinse. Avoid vinegar and acids on PVD, matte black, brushed gold and other coated finishes. Clean monthly in hard water areas.

Completing the room

Choose a matching mixer from Phoenix tapware, find an arm in Phoenix shower arms, or compare every brand in shower roses at The Blue Space.

Frequently Asked Questions

What is a shower mixer and how does it work?

A shower mixer (or shower tap) is the control valve that regulates the flow and temperature of water to your shower. A single-lever mixer controls both temperature and flow with one handle. A thermostatic mixer maintains a pre-set water temperature even if pressure changes elsewhere in the system, a safer and more convenient option, particularly for households with children. Shower mixers in Australia must comply with AS 3718 standards.

What is a wall shower head?

A wall shower (or wall-mounted shower head) is a fixed shower head mounted to the shower wall via a shower arm. The shower head position is fixed, though some models have an adjustable arm allowing the angle and extension to be altered. Wall showers are a classic, simple, and practical choice for any bathroom.

What is a rail shower with overhead and how does it work?

A rail shower with overhead shower combines a fixed overhead shower head at the top of the rail with a sliding hand shower below. A diverter valve (either integrated into the rail or fitted separately at the mixer) allows you to switch water flow between the overhead and the hand shower. This combination delivers the best of both worlds, the immersive feel of a rain shower with the flexibility of a hand shower.

What is a rail shower and why is it popular in Australian bathrooms?

A rail shower (also called a slider rail shower or shower rail kit) includes a hand shower mounted on an adjustable rail, allowing users to slide the shower head up or down to their preferred height. Rail showers are among the most practical and versatile shower options available, they suit users of different heights, are ideal for bathing children, and are easy to use for rinsing down shower walls. They are widely used in family bathrooms across Australia.

What is a hand shower and how does it differ from a fixed shower head?

A hand shower (or hand-held shower) is a shower head attached to a flexible hose, allowing it to be held and directed by hand rather than fixed in position. Hand showers are used for targeted rinsing, bathing children, washing pets, and cleaning the shower recess. Most Australian bathrooms use hand showers in combination with either a rail or an overhead shower.