Shower and bath mixers buying guide
A shower and bath mixer is a wall tap with one lever that sets the temperature and the flow for a shower, a bath or both. This page holds the wall mounted mixers and the hob mounted bath mixers from Nero, Phoenix, Caroma, Meir, Fienza, Modern National and Clark, in brushed nickel, chrome, black, gold, brass, bronze, gunmetal, white, champagne and stainless steel, with plain, diverter, progressive and paddle versions. The guide below explains how to choose by what the mixer has to do, how the four versions differ, how to read a range, which finish suits the room, and how to look after the mixer.
Start with the job
Most people choose a mixer by its looks, and the job comes second. Reverse that. A mixer that serves a shower only needs one outlet. A mixer over a bath with a hand shower needs to send the water to two places. A mixer in a shared bathroom may need a control that is easy for a child or an older person to use. Decide the job first, and the version follows, and then the range and the finish are a matter of taste.
Write the job down in one line before you shop: shower only, bath only, or bath and shower from one control. That line settles most of the choices that follow. For the parts of a mixer, with the plate, the cartridge and the handle, see shower mixers, and for what comes in the box and how rough in works, see shower and bath taps.
The plain mixer
A plain mixer has one lever and one outlet. Lift or push the lever and the water flows, and turn it to the left or right for hot or cold. It controls a single place, so it suits a shower on its own and a bath on its own. It is the simplest version, with the fewest parts to wear, and it is the right choice wherever one control serves one outlet.
The diverter mixer
A diverter mixer has a second control, a knob or a lever, that sends the water to one of two outlets. The usual pair is a shower rose and a bath spout. You set the temperature with the main lever, and you choose where the water goes with the diverter. It is the right choice over a shower and bath combination, where one wall carries both outlets and one control runs both.
Check the direction of the diverter before you decide. Some mixers divert between a bath spout and a shower, and some divert between two showers, such as a fixed head and a hand shower. Look at the product page for the model to see which pair of outlets it serves, and make sure the pipes behind the wall match. See wall basin and bath mixer sets if you want the bath spout and the mixer chosen as a pair.
The progressive mixer
A progressive mixer works as a single lever, but the lever moves in a smooth arc, and the water warms as you move it from cold toward hot. It has one range of movement, so a child or an older person can use it without learning a two step action. It suits a household where the shower is shared by many people, and it suits a bathroom where a clean line is wanted, because the lever is slim. See progressive mixers for the group on its own.
The paddle mixer
A paddle mixer replaces the lever with a flat, wide paddle. You press or push it with the palm, or the back of the hand, so it is easy with wet or soapy hands, and with a stiff wrist or a full grip. Paddle styles give a bathroom a modern line, and they pair well with a square plate. See Meir Paddle tapware for a range built around the paddle.
Wall mounted and hob mounted
Most mixers on this page are wall mounted. The body sits in the wall, behind the tile, and only the plate and the handle show. That keeps the shower and the bath rim clear, and it is the usual way to fit a mixer in a shower. It needs pipes in the wall, so the position is decided at rough in, before the wall is closed. The in-wall body and the trim are two parts, and they have to match, so check that the trim you order suits the body in the wall.
A smaller group is hob mounted. The mixer stands on the edge of a bath or on a deck beside it, through a hole, and connects with flexible hoses below. It suits a bath with a wide rim and a bath on a platform, where the controls are reached from the side. Check the thickness of the rim and the size of the hole before you order. For a mixer that stands on the floor beside a freestanding bath, see freestanding bath mixers, and for the spouts and fillers that pair with a wall mixer, see bath fillers.
Reading a range
A range is a group of pieces designed to match, with the same plate, the same handle and the same finishes. Buying from one range means the mixer, the shower head, the rail and the bath spout agree with each other. The ranges here are sold by title, and the names tell you the style and the brand. Nero Serenity and Nero Kara are progressive styles, Nero Mecca, Bianca and York are shower ranges, Phoenix Vivid MKII and Vivid Slimline carry the plain, slim look, Caroma Urbane II is round or square, Fienza Empire Slim is thin, and Meir Paddle Round is built around the paddle.
Choose the range first and the piece second. See Nero Mecca, Phoenix Vivid MKII, Phoenix Vivid Slimline, Caroma Urbane II and Fienza Empire Slim for the whole range in each case, and Phoenix shower mixers for the Phoenix mixers on their own.
By brand
Nero makes the largest group here. Phoenix is the second largest, with the slim and plain ranges. Caroma, Meir and Fienza each make a smaller group with a clear house style, and Modern National and Clark make a few. If the rest of the bathroom is from one brand, take the mixer from the same brand, since the plates, the handles and the finishes then match. See Nero taps, Phoenix taps, Caroma taps, Meir taps, Fienza taps, Modern National tapware and Clark taps.
Choosing a finish
Brushed nickel and chrome are the largest finish groups, with black, gold, brass, bronze and gunmetal close behind. Chrome is the standard finish, bright and easy to match, and it is the simplest to wipe clean. Brushed nickel is a soft silver that hides water marks and fingerprints. Black is bold against white tiles, and it needs a wipe from time to time to keep water spots off. Gunmetal is a dark grey between black and nickel. Gold, brass and bronze are warm metals that suit timber, stone and cream tiles. White and champagne are small groups, soft and quiet.
Match the finish to the other metal in the shower: the rail, the head, the arm and the towel rail. Take the mixer and the head from the same range in the same finish, because the tone differs between ranges. See brushed nickel tapware, chrome taps, black taps, gold taps, bronze taps and gunmetal tapware.
Brass and lead free brass
Most of the mixers on this page are brass, and a large group is lead free brass. A shower and a bath are places where the water touches skin and may reach the mouth of a child, so lead free brass is the better choice where it is offered. Check the compliance marks on the model you choose. See lead free taps for the wider group.
Settle the wall before the tiles
The wall is the one part of a bathroom that cannot be changed easily once the tiles are on. For a wall mixer, four things have to be decided at rough in: the height of the mixer above the floor, the position along the wall, the distance to the shower head or the bath spout and the model of the body. The plumber sets the pipes from those, and the tiler cuts the tile around the plate. Mark the position on the wall with tape, stand where you will stand in the shower, and check that you can reach the mixer without stepping into the spray.
Give the plumber and the tiler the model name, the plate shape and the finish before the wall is closed, and keep a written note with the house records.
Water flow and installation
Taps and showers sold in Australia carry a WELS rating for water efficiency, and it differs between models, so check the rating for the exact product. The mixer does not set the flow alone, because the flow depends on the supply pressure and the head it feeds. Plumbing work has to be done by a licensed plumber, so a mixer that is replaced, or moved, also goes to a plumber. The installation sheet supplied with each product is the reference for the connection and the fixings.
Care
Wipe the plate and the handle with a soft, damp cloth and mild soap, and dry them with a soft cloth to prevent water marks. Do not use abrasive pads, bleach or strong cleaners, because they can damage a brushed, black or coloured finish. A mixer that drips when it is shut, a lever that has become stiff or a temperature that is hard to control points to the cartridge, which a plumber can replace. Have the range name and the finish ready.
Questions to settle before you order
- Is the mixer for a shower only, a bath only, or a bath and shower from one control?
- Do you want a plain mixer, a diverter, a progressive lever or a paddle?
- Is it wall mounted, or does it stand on the rim of the bath?
- Which range suits the bathroom, and does it match the head and the rail?
- Which finish matches the rest of the metal in the room?
- Has the plumber agreed the height and the position before the wall is tiled?
Related pages
For the taps from every brand, start at taps.