What are sliding door edge pulls
An edge pull is a small handle fitted to the leading edge of a door rather than its face. Because it sits on the edge instead of protruding from the surface, the door can still slide fully into a cavity or pocket without the handle catching on the frame or lining. This makes edge pulls the standard hardware choice for cavity sliding doors and pocket doors, where a conventional handle or knob simply will not work.
Where edge pulls are used
Edge pulls are fitted to doors that disappear into a wall cavity when opened, commonly seen on bathroom and laundry entries, walk-in robes, and internal doorways where a swinging door would take up too much floor space. The recessed or low-profile design gives a clean grip point without adding bulk to the door edge, which is important given how little clearance a cavity door has as it travels into the wall.
Choosing the right edge pull
- Confirm compatibility with your cavity sliding door system before ordering, as edge pull dimensions and fixing methods can vary between cavity unit brands
- Check the door thickness against the pull's specifications, since edge pulls are generally designed for a specific door thickness range
- Match the finish to other hardware in the room, such as tapware or additional door hardware, for a consistent look
- Consider whether you need a single pull for one side of the door or pulls on both faces, depending on how the door is accessed
Comparing finishes across two brands
This collection includes edge pulls from both Nidus and Zanda, two established door hardware brands. Comparing across both gives a wider spread of finishes and styles to choose from than sticking to a single brand, which is useful when you are trying to match existing hardware elsewhere in the home or want to see the full range of options available for a cavity door project.
Installation notes
Edge pulls are typically fitted during the door hanging or cavity unit installation stage, so it is worth confirming your pull selection with your builder or installer before the cavity system goes in. Getting the finish and size right at this stage avoids having to source a replacement once the door and cavity are already fitted.
Pocket doors versus cavity sliders
While the terms are sometimes used interchangeably, both pocket doors and cavity sliding doors rely on the same principle of the door disappearing into the wall, and both need hardware that sits flush with the door edge rather than protruding from the face. Edge pulls suit either application, provided the specific dimensions and fixing method line up with the door and cavity system in question. If you are working from an existing opening rather than a new build, take measurements of the current hardware cut-out before ordering, as this will help confirm whether a replacement edge pull will fit without additional work to the door.
Frequently Asked Questions
What is the difference between an edge pull and a normal door handle
A normal handle or knob is fixed to the face of the door and sticks out from the surface. An edge pull is fitted to the door's leading edge instead, so it does not protrude and will not catch as the door slides into a cavity or pocket. This makes edge pulls the practical choice for any door that needs to disappear into a wall.
Will an edge pull fit any cavity sliding door system
Not necessarily. Cavity door systems from different manufacturers can have different clearances and fixing points, so it is worth checking the edge pull's specifications against your specific cavity unit before purchasing. If you are unsure, check with your installer or the cavity system manufacturer.
Why does this collection include two brands, Nidus and Zanda
Both Nidus and Zanda make edge pulls suited to cavity and pocket doors, and grouping them together makes it easier to compare finishes and styles in one place. This is useful if you are trying to match hardware you already have elsewhere in the home.
Do edge pulls need to match my other door hardware
It is generally recommended for visual consistency, particularly if the cavity door is near other doors with visible handles or hinges, or near tapware in a bathroom or laundry. Matching the finish across the space gives a more considered, cohesive result.
When should an edge pull be fitted during a build or renovation
Edge pulls are usually fitted when the door is hung or when the cavity sliding unit is installed. It is best to confirm your finish and size selection with your builder or installer before this stage so the correct hardware is on hand and does not need to be sourced again later.
