Skip to content

Caroma Liano II

9 Items

There are no products matching your search

Remove filters

Caroma Liano II basins, tapware, showers and accessories


Liano II is the Caroma range for a bathroom that wants a round, soft look in one set of finishes. The basins are thin rimmed rounds and pills in fine fire clay, the taps and accessories share a rounded handle and a round plate, and everything is available in the same metal colours, so a room can be matched from basin to heated rail.

People search for the range as Caroma Liano II, Liano II and Caroma Liano 2. This page sets out what the range includes, the sizes and ratings that decide whether each piece fits, and how to choose between the basins, taps, showers and accessories.

The finishes

Liano II tapware and accessories come in chrome, matte black and four PVD finishes: brushed nickel, brushed brass, gunmetal and brushed bronze. PVD is a coating bonded to the metal in a vacuum chamber, and it resists scratches and tarnish better than ordinary plating.

Finish Look Works with
Chrome Bright and reflective, the easiest to match White tiles, small or dim bathrooms
Matte black The strongest contrast, hides fingerprints Light walls, timber, terrazzo
Brushed nickel A soft, pewter-like silver Stone, grey and warm white tiles
Brushed brass Soft golden warmth White ceramics, green or sand tones
Gunmetal A dark, cool grey with a metallic lustre Dark vanities, charcoal tiles
Brushed bronze Deeper and darker than brass, with a caramel undertone Timber, terracotta, warm neutrals

Pick one finish and carry it through every piece. Mixing two metals in a small room tends to look like a mistake, and the range is built so that is never necessary. The matching plates, handles, rails and hooks are all made in the same colours.

Basins

The Liano II basins are made from fine fire clay with a thin rim, which is stronger against impact than many ceramics and has a smooth, stain-resistant surface. Every basin is non-overflow, has no tap hole unless stated, and comes with a matching ceramic pop-up plug and waste. The shapes are round and pill, and the colours are white, matte white, matte green, matte grey, matte pink and matte speckled.

Basin Size Bowl capacity How it sits
400mm round above counter 400 by 400mm, 125mm deep, 120mm above the bench 9.7 litres Stands on the bench
400mm round inset 400 by 400mm, 125mm deep, 65mm above the bench 7.5 litres Sits in a cut-out
440mm round under or over counter 440 by 440mm, 125mm deep 4.9 litres Under the stone, or 12mm over it
530mm pill above counter 530 by 350mm, 120mm deep, 120mm above the bench 11.9 litres Stands on the bench
530mm pill inset 530 by 350mm, 120mm deep, 65mm above the bench 10.3 litres Sits in a cut-out
580mm pill under or over counter 580 by 330mm, 125mm deep 6.7 litres Under the stone, or 12mm over it
Hand wall basin 530 by 280mm, 130mm deep, one tap hole 2.7 litres Hung on the wall

The height above the bench decides the tap. An above-counter basin sits 120mm up, so it needs a taller mixer or a mid tower mixer, while an inset basin sits only 65mm up and takes a short mixer. The hand wall basin has a tap hole, so it takes a hob mixer. Because the basins have no overflow, the waste must be a non-overflow type, and the matching ceramic waste is in the box. Browse them in Caroma Liano II basins, with the overflow versions in basins with overflow.

Mixers and taps

The Liano II mixers have a ceramic disc cartridge, a brass body and a rounded lever. The basin mixer is 200mm tall with a 120mm reach and a 101mm spout height, on a 50mm round plate, rated WELS 6 star at 4.5 litres a minute. The mid tower mixer lifts the spout for a small above-counter basin, and the tower mixer goes higher again for a larger bowl. All three have a concealed aerator and European SoftPEX hoses.

Mixer Size Rating
Basin mixer 200mm tall, 120mm reach, 101mm spout height 6 star, 4.5 litres a minute
Wall basin and bath mixer, 175mm 175mm reach, 65mm round plate 6 star, 4.5 litres a minute
Wall basin and bath mixer, 210mm 210mm spout, 175mm reach, 117mm overall height, 100mm between spout and mixer 6 star, 4.5 litres a minute
Bath and shower mixer 142mm deep, 65mm round plate, 35mm ceramic disc Operates at 150 to 500 kPa
Pull out sink mixer 430mm tall, 228mm spout height, 235mm reach 6 star at 4.5 litres, or 5 star at 6 litres
Sensor sink mixer with dual spray 533mm tall, 186mm spout height, 235mm reach 5 star at 6 litres, or 6 star at 4.5 litres with the optional check valve
Freestanding bath filler 780 to 830mm tall, spout 730 to 780mm high, 228mm reach 35mm ceramic disc

Three of these need planning early. The wall mixers go into the wall before the tiles, so choose the 175mm or the 210mm spout while the wall is still open. The freestanding bath filler stands on the floor beside the bath, so the pipe must come up through the slab at the right place. The sensor mixer is powered, so a power point is needed under the sink. The mixers sit on the Caroma Easy-Switch system, a universal in-wall body that lets the plumber fit the body first and the trim afterwards, which means a change of finish does not mean opening the wall again.

The full set is in Caroma Liano II mixers and tapware, and the low lead versions are in Caroma Liano II low lead tapware.

Showers

The Liano II showers have three spray options, a PVD or plated brass body, and work at 150 to 500 kPa. They are rated WELS 3 star at 9 litres a minute, and the registration number is on each product.

Shower Size Notes
Rail shower 680mm tall, 210mm arm, 55mm projection, fixing distance 500 to 600mm A hand shower on a slide rail with three sprays
Rail shower with overhead A rail with an overhead rose Two heads on one mixer
Compact twin shower with overhead 464mm tall, 400mm arm, 610mm projection, 300mm head, 55mm back plate Overhead and hand shower, each 3 star at 9 litres, G1/2 thread

The rail shower suits a family, because the hand shower slides to the height of a child or an adult. The compact twin suits a smaller shower recess, because the 400mm arm and 300mm head give a large spray without a tall column. Check the projection against the width of the recess, so the water lands inside the screen. The showers need a mixer or wall top assemblies for control. See Caroma Liano II showers.

Towel rails, hooks and holders

The accessories are 304 stainless steel with a PVD finish, in the same colours as the tapware. The double towel rail is 843mm long with an 800mm fixing distance and a 120mm projection. The large wall hook is 90mm across and projects 50mm. The toilet roll holder has a 43mm round plate, projects 100mm and stands 326mm tall.

The fixing distance is the number to measure on the wall. Mark it with a level before you drill, and fix to solid backing. A double rail projects further than a single rail, so keep clear space beside it. See Caroma Liano II bathroom accessories.

Heated towel rails and ladders

The heated rails are 304 stainless steel with an IP55 rating, in the same finishes as the tapware plus polished stainless steel. There are three shapes, and each suits a different wall.

Rail Size Power Best for
Heated towel ladder 632 by 900 by 116mm, eight bars, fixing 700mm by 600mm 68 watts, 230 to 240 volts, 1.4m lead Several towels on a free wall
Vertical rail 104 by 900 by 75mm, one bar, fixing 800mm 20 watts, 12 volts A narrow wall beside a door or vanity
Horizontal rail 640 by 32 by 75mm, one bar, fixing 600mm 12 watts, 12 volts, concealed wiring One towel under a vanity or shelf

The ladder can be wired from the top or the bottom, left or right, so the cable can leave on the side nearest the power. The 12 volt rails need a transformer, so plan its position and the power before the wall is lined, and have a licensed electrician connect any hardwired rail.

Planning a Liano II bathroom

Start with the basin, because it sets the tap height. Choose the mixer to suit it: a short mixer for an inset basin, a mid tower for a small above-counter basin, a tower for a larger bowl. Then choose the shower and the rails in the same finish, and decide the heated rail position and the power at the same time.

The range is built from circles, so it looks best against plain, simple surfaces. Round basins, soft-edged mirrors and plain tiles all agree with it. A room full of hard angles and busy pattern fights the shape, and a square range would sit better there.

The finish is the last decision, and the hardest to change. Take a sample to the room if you can, because brushed brass, bronze and gunmetal all shift in warm and cool light.

Fitting and care

A plumber should install every mixer and shower, and a licensed electrician should connect heated rails and the sensor mixer. Fix rails and hooks to solid backing, and check for pipes and cables before drilling. Wipe the metal finishes with a soft cloth and warm soapy water, then rinse and dry. Avoid abrasive pads, bleach and harsh cleaners, and wipe brushed finishes along the grain. Clean the aerator if the spray turns uneven. Clean the basins with mild soap and a soft cloth, and avoid scouring powders on the matte colours.

Before you order

Check the basin height above the bench against the mixer. Check the spout reach so the water lands inside the bowl, and read the rating on the exact model, because the flow differs between a basin mixer and a kitchen mixer. Measure the fixing distance of rails against the wall, and settle the power for any heated rail or sensor mixer. Choose the finish for the room, and use it across every piece.

Frequently Asked Questions

What is a wall faced toilet?

A wall faced toilet (also called a close-coupled toilet suite) features a cistern that sits directly on top of and flush against the rear of the toilet pan, creating a seamless back panel. The back of the unit sits flat against the wall, giving a cleaner look than older exposed-plumbing models. Wall faced toilets are the most common toilet suite type sold in Australia and suit both modern and traditional bathrooms.

What is a rimless toilet and why does it matter?

A rimless toilet has no enclosed channel under the bowl's lip. Traditional rimmed toilets have a hidden channel that water flows through during flushing, this is hard to clean and can harbour bacteria and limescale. A rimless bowl flushes water directly across the surface instead, making it easier to keep hygienic.

What's the difference between a wall-faced, wall-hung and behind-the-wall toilet?

A wall-faced (close-coupled) toilet has the cistern sitting on top of and against the pan, with both visible. A behind-the-wall (in-wall/concealed) toilet hides the cistern inside the wall cavity, leaving only the pan and a flush plate visible. A wall-hung toilet goes further again, mounting the pan itself off the floor for a fully floating look.

Do you offer warranties on your products?

Yes. All products come with manufacturer warranties, which vary by brand and product type. Warranty periods and terms are listed on individual product pages, and our team can help clarify coverage for any item before you purchase.

How do I know which basin mixer is right for my basin type?

The key factor is the height and style of your basin. For standard inset or semi-recessed basins, a regular deck-mounted basin mixer with a spout height of around 100–140mm works well. However, if you have an above-counter or vessel basin, where the bowl sits on top of the benchtop, you will need a tall basin mixer with a spout height of 180mm or more, otherwise the spout will sit below the basin rim and water will splash onto the benchtop. Wall-mounted mixers offer another option for above-counter basins, with the height controlled by your rough-in position. Always confirm basin rim height before purchasing your tapware.

What is the difference between a bath mixer and a basin mixer?

While bath mixers and basin mixers may look similar, they are not interchangeable. The key technical difference is the water supply connection size. This difference matters because filling a bathtub requires a significantly higher flow rate, a basin mixer simply cannot deliver water fast enough to fill a bath in a reasonable time. Always use tapware specified for bath applications when fitting out a bath, and consult your plumber if you are unsure.

What is a rail shower and why is it popular in Australian bathrooms?

A rail shower (also called a slider rail shower or shower rail kit) includes a hand shower mounted on an adjustable rail, allowing users to slide the shower head up or down to their preferred height. Rail showers are among the most practical and versatile shower options available, they suit users of different heights, are ideal for bathing children, and are easy to use for rinsing down shower walls. They are widely used in family bathrooms across Australia.

What is Caroma Liano II?

Liano II is a coordinated Caroma bathroom suite range spanning toilet, basin and tapware, built around one design language so the pieces can be bought as a matching set or individually. It's the second generation of the original Liano range, updated with current flush technology and a refreshed basin and tapware profile rather than being an entirely new line. For the original, earlier-generation range, see Caroma Liano.

What does the 'II' in Liano II mean?

It marks Liano II as an updated generation of Caroma's original Liano suite, not a separate product line. Caroma applies this naming across several of its ranges when a suite's design or internal componentry is refreshed, so Liano II carries the same general design intent as the original Liano but with current-generation features such as a rimless bowl, which older Liano stock may not have had.

Is the Liano II toilet rimless?

Current Liano II toilet pans use Caroma's CleanFlush rimless bowl as standard, which removes the hidden rim channel under the bowl's lip so water washes directly across the exposed surface with each flush. Always confirm this on the specific listing, since it can vary between older and current stock.

How does Liano II compare to Caroma's other current suites, like Urbane II or Contura II?

The suites mostly differ in basin shape and tapware styling rather than core function, since a rimless bowl is now standard across most current Caroma ranges. Liano II tends toward a slim, streamlined profile with clean lines, a more minimal look than the softer curves of some other Caroma suites. Choosing between them usually comes down to which shape suits the rest of the room.

Can I buy just the Liano II basin or tapware, without the toilet?

Yes, the suite is designed so pieces can be bought individually as well as together. For basin options specifically, see Caroma Liano II basins, and for the matching tapware, see Caroma Liano II tapware. Both go into more detail on mounting types, finishes and spout height than this whole-range page covers.

What's included if I want to fit out a whole bathroom in Liano II?

The range covers the core suite categories, toilet, basin and tapware, designed to be bought together for a consistent look across the room. Not every finish or configuration is available in every category at all times, so it's worth checking current stock across all three before committing a full bathroom design to the one range.