Caroma Liano II basins buying guide
The Liano II is Caroma's coloured basin range. Each basin is hand cast and the colour is applied by hand, so every basin is unique and the colour can look a little different from the photos. The range has a thin rim, round and pill shapes, and finishes from gloss white and matte white to matte black, green, grey, pink and speckled. This page holds the Liano II basins in above counter, inset, under or over counter and wall hung forms. The guide below goes through the models and sizes, the colours, how each type is installed, the overflow and waste choices, the tapware that pairs with them and the care they need.
The models and sizes
Five models make up the range here, and the shape and the mounting type are what separate them.
- The 400mm round is 400mm across and 125mm high. It comes as an above counter basin and as an inset basin, with no tap holes and no overflow.
- The 440mm round is an under or over counter basin, 440mm across and 125mm high, with a bowl of about 4.9 litres. It comes without an overflow, and also with an overflow in a deeper form of about 182mm.
- The 530mm pill is 530mm by 350mm and 120mm high. It comes as an above counter basin, with a bowl of about 11.9 litres, and as an inset basin. Neither has a tap hole or an overflow.
- The 580mm pill is an under or over counter basin, 580mm by 330mm and 125mm high without an overflow. The overflow version is 580mm by 400mm and 182mm high, and its bowl is 12 litres to the rim or 6.7 litres to the overflow.
- The hand wall basin is 530mm by 280mm and 130mm deep, holds about 2.7 litres and has one tap hole. It has no overflow.
Bowl sizes differ between models. For example, the 530mm pill inset bowl is 10.2 litres, while the above counter version is 11.9 litres. The two are different basins, so read the volume for the model you are buying before you plan the vanity around it. See round basins and oval basins for other shapes, and small hand basins for compact wall hung options.
Colours and finishes
Gloss white, matte white and matte black are the standard finishes. Matte green, matte grey, matte pink and matte speckled are special order finishes with a longer wait than the standard colours. The speckled finish is a soft, subtle speckling in grey and white. Because the colour is applied by hand, the colour appearance will vary from the product images. Plan for that if you are matching the basin to tiles or a painted wall, and look at the colour in the room light before you commit to it.
For the single-colour views of the range, see matte white, black, grey, green, pink and white basins. The matte finishes show less reflection than gloss, and they typically show fewer water spots and fingerprints than glossy ones.
Above counter installation
An above counter basin sits on the benchtop, so the bench is cut with a template and the basin is bedded on it. The 440mm installation steps run as follows. Position the supplied template over the countertop and fix it with adhesive tape, or transfer the cut-out line. Drill 20mm holes and use them as starters for the jigsaw. Fit the waste assembly to the basin, then clean the underside of the sealing rim and the fitting face of the basin so both are free of dust, dirt and grease. Apply a layer of acetic cured silicone sealant around the sealing rim, bed the basin on the countertop, connect the waste to the trap and plumb the taps, then clean off the excess silicone.
The key rule is the sealant. The underside of the basin rim must be sealed to the benchtop with an acetic cured silicone, and epoxy type glues must not be used. The 400mm above counter basin has an optional dress ring, which fixes to the basin with double-sided tape. Installation must be in accordance with AS/NZS 3500.2. Water connections need a licensed plumber. An above counter basin does not protrude below the benchtop, so it keeps the storage space in the vanity, and its height means it pairs best with wall taps or extended mixers. See above counter basins.
Inset installation
An inset basin drops into the bench and the rim sits on top of it, so it suits a bench where you want the rim to read as a thin line and not a bowl on the surface. The 400mm round and the 530mm pill are available as inset basins, and each is supplied with a template which must be used for the benchtop cut-out. The same sealing rule applies: seal the underside of the rim to the benchtop with acetic cured silicone and never use epoxy. The 530mm pill has an optional dress ring, with five finishes to match tapware. See inset basins.
Wall hung hand basin
The hand wall basin is 530mm wide and 280mm deep, with one tap hole and a bowl of about 2.7 litres, which suits a powder room or a small ensuite. It comes with a D.200 fixing kit that bolts directly to the finished wall, so the wall behind it has to be solid. Wall hung basins need fixing to a support beam or noggins behind the wall sheeting, and that is set out before the wall is lined. The trap is a 40mm outlet. Choose between the 40mm Caroma plastic short P-trap and a 40mm Vogue bottle trap in six finishes, to match the tapware and the waste cap. See wall hung basins and Caroma wastes and traps.
Overflow
The overflow line is one of the main differences inside the range. The 400mm round, the 530mm pill and the hand wall basin have no overflow. The 440mm round and the 580mm pill are offered both ways. The overflow is designed for a maximum tap flow of 15 litres per minute, and the 580mm overflow version holds 6.7 litres to the overflow against 12 litres without one. The overflow version includes a chrome overflow dress ring, with coloured overflow dress rings sold separately.
If you want an overflow, choose the 440mm or 580mm model, because the other models do not have one. See Caroma Liano II basins with overflow.
Waste and plug
Each basin is designed and supplied with an integrated waste and a ceramic pop-up cap matched to the basin colour. Optional ceramic caps come in six finishes, and optional brass caps in five finishes to match tapware and a bottle trap: black, brushed brass, brushed nickel, chrome and gunmetal grey. Metallic wastes from the Urbane II range are available as an additional purchase, and the Liano II basins are compatible with the Urbane II metallic pop-up plugs and wastes. Check the finish of the waste against the finish of the tapware and the trap before you order, because the colour matched ceramic cap is the default and the metal caps are an upgrade. See basin wastes.
A ceramic basin's waste is tightened by hand only, with a foam washer, and sealed with neutral cure silicone where the waste meets the bowl.
Tap holes and tapware
All the basins except the hand wall basin have no tap hole, so the mixer sits on the benchtop behind the bowl or on the wall. The hand wall basin has one. Liano II tapware pairs with the basin in the same range. The tower basin mixer suits above counter basins by its height, and the mid tower suits smaller above counter basins, which is useful for the 400mm round. The wall basin and bath mixer sets have 175mm and 210mm spout projections, which is the dimension to check against the depth of the bowl. The taps are rated WELS 6 star at 4.5 litres per minute, and the trim kits can be changed after installation between the Liano II and Urbane II ranges. See the Liano II range, basin mixers and Caroma taps.
Choose the tapware before the bench is drilled, because the mixer position is set by the bench and the wall, not by the basin.
Care and cleaning
The surface is smooth, stain-resistant, non-porous and easy to clean. For daily care, clean vitreous china basins with a soft cloth and a mild household detergent or warm, soapy water. If everyday cleaning does not lift a stain, use a damp sponge or cloth with a mild abrasive cream or paste cleanser, applied with light pressure in wide circular motions and rinsed thoroughly. Water and a damp cloth are enough day to day, and a bathroom cleaner lifts water marks and soap scum. For limescale use household vinegar, and on a stubborn stain leave a vinegar-soaked piece of kitchen paper on for 30 minutes. Cream cleaners can dull the surface of ceramic if overused, so test an area that is not highly visible first.
That caution matters more on a matte basin, because a matte surface is the one that would show a dulled patch. The safe course on the matte coloured Liano II finishes is the gentlest method first: a soft cloth, mild detergent and warm water, with a test on an unseen area before any cream cleaner. A scratch in glazed ceramic cannot be repaired, so avoid abrasive pads.
Avoid harsh chemicals such as Domestos, which will destroy the chrome on overflow caps and can deteriorate the rubber seals in wastes, and never mix different cleaning products. That applies directly to the overflow models, which come with a chrome overflow dress ring, and to any metal waste cap. Rinse the basin clean after using a cleaner so residue does not sit on the seals in the waste. The material is fine fire clay, a ceramic, so follow the ceramic care advice above.
Choosing a Liano II basin
- Choose the mounting type for the bench: above counter for a visible bowl, inset for a thin rim on the surface, under counter for a flat bench, or the hand wall basin for a small room.
- Choose the size for the vanity and read the volume for the exact model.
- Choose the finish, remembering that the green, grey, pink and speckled finishes are special order and that hand applied colour varies.
- Decide if you want an overflow, which narrows the choice to the 440mm round or the 580mm pill.
- Choose the tapware and the waste finish together, so the mixer, the waste cap and the trap match.
Other Caroma basin ranges
The Liano II sits beside other Caroma basin ranges. See Contura II, Urbane II and Luna basins, and Caroma basins for the whole brand. For the cabinet to pair with, see bathroom vanities, and for every other maker and colour, see bathroom basins.