Champagne toilet roll holders buying guide
Champagne is its own finish, distinct from gold, brass and brushed nickel. This page holds two Meir holders in champagne, the Round and the Curvaé, so the choice is about the shape and the metal behind it. The Round is solid brass with a classic profile, and the Curvaé is a slim 304 stainless steel holder with a dual wall fixing. Both come from the same range as Meir tapware, so they pair with a champagne Meir tap.
The two champagne holders side by side
| Holder | Body | Size | Fixing |
|---|---|---|---|
| Curvaé | 304 stainless steel | 170mm long, 64mm deep, 29mm high, 125mm hanging length | Dual wall fixing |
| Round | Solid brass | Check the product for size | Fixing kit |
Curvaé
The Curvaé in champagne is the slim holder. It is 170mm long and 64mm deep and only 29mm high, with a 125mm hanging length, built from 304 grade stainless steel. Its champagne is a PVD finish, a hard coating applied in a vacuum chamber and made to last. The holder is fixed by a dual wall fixing, and the box holds the holder, a fixing kit and installation instructions.
Round
The Round in champagne is cast in solid brass, in a classic shape made to suit any bathroom or powder room renovation. It carries a lifetime warranty on its finish, product and parts, and a fixing kit comes in the box. The Round in other finishes projects 80mm, so allow for a deeper holder than the Curvaé.
Where to fix a champagne holder
Mark the centre of the roll between 660mm and 760mm above the finished floor, and 200mm to 300mm in front of the pan's front edge. That gives a first position, not a final one. Tape a spare roll to the wall, sit down and check that you reach it comfortably. Look at the door swing, the shower screen and any vanity beside the pan, and if the toilet is not in a corner, fix the holder to the side of a vanity, the back wall or a partition at the same height.
The champagne finish
Champagne is one of seven finishes Meir offers on the Curvaé and the Round, with brushed nickel, chrome, lustre bronze, matte black, shadow and tiger bronze. It has its own name, so a search for champagne finds these two holders and no others from Meir. If champagne is not the finish you need, tiger bronze and brushed nickel are the neighbouring Meir finishes, and the Meir toilet roll holders page shows all seven.
The Curvaé against the Round
The two share a finish name and a maker, and little else. The Curvaé is stainless steel, low and flat with a dual wall fixing, and it keeps the roll close to the wall. The Round is brass, deeper at 80mm in the other finishes, and carries the lifetime cover. In a plain modern bathroom the Curvaé is the closer match, and in a classic room or a powder room the Round is.
How deep and how long
| Group | Projection | Holder |
|---|---|---|
| Medium | 60mm to 70mm | Curvaé at 64mm |
| Deep | Over 70mm | Round at 80mm in other finishes |
The Curvaé's 170mm length and 125mm hanging length take a standard roll, and the 29mm height keeps the holder low and neat. The Round has no champagne size figure, so confirm its dimensions on the product page before you plan the wall.
The metal behind the champagne
The Curvaé is 304 stainless steel, a common bathroom grade, and the Round is solid brass, the heavier build. The champagne is a coating over the metal, so the two holders look alike on the wall and feel different in the hand. If a lifetime warranty matters to you, the Round is the champagne holder that carries it.
How the champagne holders are fixed
The Curvaé is held by a dual wall fixing, which means two fixing points, and the Round comes with a fixing kit. Extra fixing points share the pull of a sheet being torn off, though every point needs solid material behind the tile or plasterboard. Before drilling, locate a stud or fit a backing plate and check what pipes and cables run behind the wall.
What comes in the box
Inside the Curvaé box are the holder, a fixing kit and installation instructions. The Round ships with a fixing kit.
A champagne set from one range
Meir makes champagne in the same two ranges for robe hooks, so a holder and a hook can match across the bathroom. The Curvaé robe hook comes as a single, 29mm long and 55mm high, and as a double, 100mm long, and the Round robe hook is solid brass. See champagne robe hooks for the hooks and champagne bathroom accessories for the rest of the finish.
The same Curvaé in every finish
The Curvaé holder is 170mm long, 64mm deep and 29mm high in all seven finishes, so the champagne holder takes exactly the wall space of the nickel or the black one. That makes the finish a late decision. You can plan the wall around one set of measurements, then choose the finish when the tapware is confirmed. The same goes for the fixing: a dual wall fixing in every finish.
Meir finishes beside champagne
| Finish | Round | Curvaé |
|---|---|---|
| Champagne | Yes | Yes |
| Tiger bronze | Yes | Yes |
| Lustre bronze | Yes | Yes |
| Brushed nickel | Yes | Yes |
| Chrome | Yes | Yes |
| Matte black | Yes | Yes |
| Shadow | Yes | Yes |
The Harrington, the third Meir holder, is offered only in brushed nickel, so it is not a champagne option.
The Round and its range
The Round belongs to Meir's Minimalist group, a classic design that suits any bathroom or powder room renovation. In solid brass with a lifetime warranty on its finish, product and parts, it is the holder to choose when you want the champagne to look settled and traditional. Because it is a brass body, it also feels heavier in the hand than the stainless steel Curvaé.
Reaching the roll
Whichever holder you choose, test the reach with a roll in position before you commit. The Curvaé hangs the roll 125mm along its arm, so you can see how it sits against the wall. A thicker roll fills more of that length, and a thinner one leaves a gap. If the roll rubs the wall, choose the deeper Round, and if the wall is tight, choose the Curvaé.
Accessible bathrooms
A residential bathroom has no mandatory holder height, but an accessible one is set out under AS 1428.1 and the project documents. If the holder is part of an accessible brief, confirm its height and its distance from the pan against those documents before you fix anything. The champagne holders are single-roll holders in a decorative range, so check the brief first.
Which champagne holder for which bathroom
| Situation | Holder |
|---|---|
| A slim, modern holder | Curvaé, 29mm high |
| A classic shape in brass | Round |
| A lifetime warranty on the finish | Round |
| A shallow holder beside a door | Curvaé, 64mm |
| A holder to match champagne Meir hooks | Either, from the same range as the hook |
Before you order
| Check | Why it matters |
|---|---|
| Finish name on your tap | Champagne, not gold or brass |
| Space beside the pan | 64mm to 80mm out |
| Backing behind the screws | A stud or backing plate in a framed wall |
| Roll height | 660mm to 760mm to the centre of the roll |
Fitting to tile, plasterboard or an open frame
What sits behind the surface decides how the holder goes on. On tile, use a masonry bit and start slowly so the tile does not crack, then fit the dual wall fixing or the Round's fixing kit. On plasterboard, find a stud or use an anchor rated for the pull of a roll. In a frame that is still open, ask the builder to fit blocking at the roll height, so the screws bite into solid timber. In every case, look for pipes and cables before you drill.
Replacing an old holder
To swap in a champagne holder, measure the old one first. The Curvaé is 170mm long, so a shorter old holder may leave screw holes showing around a longer new one. Choose the holder that covers the old marks, or fill and repaint the holes before you fit. Take the old fixing distance from the product page of the new holder, not from memory.
Two rolls or a spare
Both champagne holders are single-roll holders. For two rolls together or a reserve roll near the pan, see double toilet roll holders and spare toilet roll holders, though neither is offered in champagne.
Matching your champagne tapware
Choose the holder by the finish name on your tap, not the nearest pale gold or brass. Meir offers the Curvaé in seven finishes so it follows Meir tapware. A champagne from another brand can sit slightly apart on one wall, so keep the holder in the Meir family when the tap is Meir. If you want a warmer tone, compare brass toilet roll holders and gold toilet roll holders.
Across the room
The toilet roll holders page shows every brand and every form, and the finish carries across the wall to the other champagne fittings listed above.