Gold toilet roll holders buying guide
Gold is the brighter, more vivid cousin of brass. It runs from a pale champagne tone to a warmer yellow-gold, and it suits modern bathrooms that want a clear accent rather than a muted one. The shade of gold varies more from brand to brand than most finishes, so match the holder to the gold on your tapware by range, not by the word gold. This page holds gold toilet roll holders from Nero, Phoenix, Caroma, Fienza and Meir, including singles, double holders, shelf holders, a spare holder, a dual purpose holder and a grab rail range.
Gold, brass or champagne
Three neighbouring finishes cause most of the confusion. Gold is the bright, vivid one. Brass is softer, warmer and more muted, and the warm names Brushed Brass, Urban Brass and Aged Brass sit there. Champagne is the pale end of the gold range. Several products on this page carry a brass name because the same holder sits in both collections, and you will find them described from the brass side on brass toilet roll holders. For the paler tone, see champagne toilet roll holders. If you want a deeper tone with brown undertones, bronze toilet roll holders are the step beyond brass.
Nero in brushed gold
Nero has the widest choice of brushed gold holders, and the finish is PVD across the ranges. The Mecca and the Bianca are 304 stainless steel, and the Bianca projects 65 mm and is 180 mm long. The Dolce II is 304 stainless steel with a 77 mm projection, a 161 mm length and a 46 mm round plate. The Opal and the Bianca with shelf are solid brass. The Nero York in aged brass is the odd one out, an electroplated brass holder that projects 81 mm, is 187 mm long and sits on a 48 mm round plate. The Zen is 316L stainless steel, 175 mm long with a 72 mm projection, an 18 mm holder and a single fixed concealed bracket, and it is the grade to look at for a bathroom close to the coast.
In the double range, the Mecca Double is 270 mm long and projects 75.4 mm, while the Mecca Double with Shelf is 300 mm long, projects 100 mm and stands 100 mm high. Nero Mecca Care adds accessible pieces in the same finish. The 32 mm grab rail with toilet roll holder is 450 mm long with an 88 mm projection and a 150 kg capacity, and 32 mm rails are approved for standard AS 1428.1 requirements in DDA bathrooms. The heavy duty holder projects 80.5 mm, the 25 mm toilet roll rail comes in 300 mm and 450 mm lengths, and the add-on holder fits any modular 32 mm grab rail and is secured with a grub screw.
Phoenix in brushed gold
Phoenix names its gold Brushed Gold across the Radii in round and square plate, the Vivid Slimline, the Cromford, the Gloss, the Wiltern and the Vivid MKII. The Vivid MKII is the shallowest at 48 mm and 140 mm long, and it matches Vivid MKII tapware, showers and accessories. The Cromford projects 61 mm and is 138 mm long, in brass with a PVD finish and a dual fixed concealed bracket on a twin screw mounting plate. The Wiltern is stainless steel with a PVD finish, 188 mm long with a 67 mm projection and a 50 mm round plate. The Vivid Slimline has a concealed fixing and a mechanism that allows quick level adjustment during installation, and its finish is electroplated.
Brass-named gold from Caroma, Fienza and Meir
Caroma names its gold-toned finish Brushed Brass across the Luna, Urbane II, Urbane II Universal, Liano II, Contura II and the Liano II Double and Spare. The Luna has concealed dual fixings, and the Urbane II is stainless steel with a PVD finish made to match Urbane II tapware. The Liano II is 304 stainless steel with a 75 mm projection and 3 point fixing, and the Contura II is 167 mm wide with an 83 mm projection and dual fixings. The Urbane II Universal is 152 mm long with a 130 mm hanging length.
Fienza names it Urban Brass on the Kaya, Tono and Empire Slim, all PVD on stainless steel. The Kaya is 158 mm long and 78 mm deep with a 119.5 mm hanging length, and it has a 4-point wall mount with fully concealed fixings that can face left or right. The Empire Slim measures 171 mm by 73 mm deep. The Tono holder is a slim 165 mm design that projects 70 mm and stands 22 mm high, and the Tono with a glass shelf projects 110 mm, stands 92 mm high and has a 96 mm fixing distance, on high-strength brackets with a hex key supplied for installation. Meir's gold-toned finish is Tiger Bronze on the Round, in solid brass, and the Curvaé, in 304 grade stainless steel with a dual wall fixing, 170 mm long, 64 mm deep and 29 mm high.
Measurements for the gold-named ranges
| Holder | Finish name | Measurements |
|---|---|---|
| Phoenix Vivid MKII | Brushed Gold | 48 mm projection, 140 mm long |
| Phoenix Cromford | Brushed Gold | 61 mm projection, 138 mm long |
| Nero Bianca | Brushed Gold | 65 mm projection, 180 mm long |
| Phoenix Wiltern | Brushed Gold | 67 mm projection, 188 mm long, 50 mm round plate |
| Nero Zen | Brushed Gold | 72 mm projection, 175 mm long, 18 mm holder |
| Nero Dolce II | Brushed Gold | 77 mm projection, 161 mm long, 46 mm round plate |
| Nero Mecca Double | Brushed Gold | 75.4 mm projection, 270 mm long |
| Nero Mecca Double with Shelf | Brushed Gold | 100 mm projection, 300 mm long, 100 mm high |
What gold holders are made from
The gold is a coating, and the metal underneath differs by range. Solid brass: the Nero Opal, the Nero Bianca with shelf and the Meir Round. Brass: the Nero York and the Phoenix Cromford. 304 stainless steel: the Nero Mecca, Bianca, Dolce II, Mecca Double and Mecca Care pieces, the Caroma Liano II and the Meir Curvaé. 316L stainless steel: the Nero Zen. Stainless steel: the Fienza Kaya, Tono and Empire Slim, the Phoenix Wiltern and the Phoenix Vivid MKII. Metal: the Caroma Contura II. Two holders in the same gold can therefore differ in grade, which is worth checking when the bathroom is close to the coast.
Matching gold to your tapware
Caroma recommends keeping Luna Brushed Brass tapware and accessories together so the finish stays consistent, and it makes the Urbane II holder to match Urbane II tapware. The Phoenix Vivid MKII carries its finish through Vivid MKII tapware, showers and accessories, and the Meir Curvaé comes in seven finishes to match Meir tapware. Because gold shades vary from brand to brand, a holder from the same brand and range as the tap is the safest match, and a holder from another brand is worth holding against the tap before you decide.
Other forms
The double, shelf, spare and dual purpose versions in gold are set out in full on stainless steel toilet roll holders, double toilet roll holders, toilet roll holders with shelf and spare toilet roll holders.
How gold holders fix to the wall
Gold ranges use the same fixing families as the rest of the collection, and the fixing decides how the holder looks up close:
- Phoenix Cromford, Wiltern and Vivid MKII use a twin screw mounting plate, and the Cromford adds a dual fixed concealed bracket.
- Phoenix Vivid Slimline has a concealed fixing with quick level adjustment.
- Nero Zen has a single fixed concealed bracket, and the Nero Mecca Care add-on is held on its rail by a grub screw.
- Caroma Luna has concealed dual fixings, Liano II uses 3 point fixing, and Urbane II and Contura II use dual fixings.
- Fienza Kaya has a 4-point wall mount with fully concealed fixings, and the Tono with glass shelf uses high strength brackets with a hex key included.
Gold in a small bathroom
Projection is the number to watch in a narrow room. Among the gold-named ranges the Phoenix Vivid MKII (48 mm), Cromford (61 mm) and Nero Bianca (65 mm) stand out least, while the Mecca Double with Shelf (100 mm) and the Fienza Tono with glass shelf (110 mm) stand out most because of the shelf and the second roll. Measure the clear wall beside the pan before you choose a form. If the holder is going on a vanity end panel instead of a tiled wall, confirm the fixing suits the panel, because every system above assumes a solid wall.
Planning the install
A fixing kit or an install kit is supplied with each gold holder. Check what sits behind the tile or plasterboard before you drill, and test the reach with a spare roll taped in place. When you are replacing a holder, measure from the centre of one fixing hole to the centre of the other and compare it with the new holder's fixing spread. Check the facing as well: the Fienza Kaya mounts left or right, which helps when the old fixings sit on the wrong side of the pan.
The rest of a gold set
- Brass and gold towel rails for the towel position
- Gold bathroom accessories for the full finish range
Shop each brand's gold holders
- Nero toilet roll holders
- Phoenix toilet roll holders
- Caroma toilet roll holders
- Fienza toilet roll holders
- Meir toilet roll holders
Check the main toilet roll holders page for the height to mount a holder and how far it sits from the pan.

