Decina baths buying guide
Decina baths are acrylic freestanding, back to wall, inset, corner and spa baths from an Australian owned and operated maker, in business since 1989, that designs and manufactures its own bathroom products. The collection covers around thirty ranges, from a 1295mm corner spa to an 1850mm two-person spa, plus shower baths, shower bases and the support frames and headrests that go with them. The sections below follow the formats, then the details that decide a choice: size, depth, weight, overflow and waste, support, installation and care. Each format links to its own collection when you want to compare models.
Decina acrylic and standards
Decina baths are moulded from premium cross-linked sanitary grade acrylic and tested to Australian safety standards, with designs that resist chemicals and scratching. Almost every Decina bath here is premium sanitary grade acrylic in high gloss white, and one range, the Aurora, is matte white. The bath types are freestanding baths, freestanding spa baths, inset and island baths, inset and island spa baths, pressed metal baths, shower baths and the components that go with them. There are two spa lines, Contour and Dolce Vita.
The standards are named per bath. The Alegra, Bianco, Prezzo, Valentina, Novara, Caval, Aria and Florencia are built to Australian Standard AS 1172.5:2019, and the Turin spa bath to AS3861/1991. Not every bath names its standard, so ask us to confirm it for the bath you are choosing.
Freestanding baths
The freestanding Decina baths run from 1300mm to 1700mm. The Prezzo is a classic oval with a thin lip and reclining lumbar areas at both ends. The Prezzo 1500 is 800mm wide, 530mm high, holds 121 litres measured 200mm below the rim and weighs 37kg, and its two lumbar areas accommodate two bathers. The Novara is another oval at 1680mm by 750mm, 580mm high and 182 litres, and the Valentina comes in 1500mm and 1700mm with a centre waste suitable for two. The Lola is 1700mm by 800mm by 600mm with a 490mm inner depth and 190 litres. The Regent is a traditional oval with panel style details and a flared skirt that suits a Hampton or farmhouse bathroom.
Two baths break the pattern. The Caval has a sloped profile, a high reclining backrest and a waste at the end of the bath, not the centre. The Cosmo is a Japanese style soaking bath only 1300mm long, with a raised backrest and a deeper interior. The Florencia is round, 1400mm by 1400mm and 600mm high, and holds 290 litres measured 200mm below the rim. Most baths in this group have an integrated overflow, adjustable self-supporting feet and, where fitted, an internal steel support frame. The freestanding baths page covers the type across every maker, and round baths covers the round models.
Back to wall and back to corner baths
A back to wall bath sits against a wall with its other sides finished. The Decina range here has several. The Alegra is a back to wall freestanding bath in 1400mm, 1500mm and 1700mm, 800mm wide and 585mm to 590mm high, with an integrated overflow and a centre waste. The Aria comes in 1500mm and 1700mm, 800mm by 610mm, with a tile bead so it can sit into a tiled wall. The Aurora is a matte white back to wall bath with an integrated slot overflow, and it includes a matching matte white plug and waste. The Oxford is a traditional style bath at 1700mm with a 470mm inner depth and 174 litres.
The Bianco and the Natalia can sit in a corner as well as against a wall. The Bianco comes in 1400mm and 1500mm and can be installed as a back to wall or a back to corner bath. The Natalia is a back to corner bath for a left or right corner, with a 2-sided tile bead. Decina's Bianco baths have their own page. For the format in general see back to wall baths and corner baths.
Inset, island and shower baths
The inset and island baths are built into a tiled hob or surround. The Fabrino is an inset bath of 1675mm with a tile bead and a 400mm height. The Bambino is a 380mm deep inset bath in 1510mm and 1650mm with an end waste. The Modena is wider and deeper than traditional shower baths and comes in 1205mm, 1515mm, 1650mm and 1790mm. It has moulded arm rests, lumbar support, a steel rod reinforced rim and a double reinforced base, and its tile bead strip is not included. A bath with a tile bead can be used as a shower bath, because the bead lets it sit into a wall. It should be installed on a cement slurry mix or a base support frame.
The three Luna shower bases are the other shower product here: a 900mm centre outlet base, a 1000mm curved base and a 1000mm centre outlet base. They are premium sanitary grade acrylic with a 49mm entry height, and no mortar bed is required. See built in baths, shower baths and baths for tile edge for the formats.
Spa baths
The spa baths are Decina's largest group, and they have their own pages: Decina spa baths, Decina Alegra freestanding spa baths and the general spa baths page. They run from the 1295mm Angelique corner spa to the 1850mm Duo, with layouts from 12 to 20 jets, a 750 watt TriFlo Eco pump and a rim mounted touch pad or a remote. Decina spa baths run on a standard 10 amp supply and include a safety cut-off system for jet blockages, and the pump runs at 65 decibels. The Alegra's heater is rated at 700 watts and 7.5 amps. The detail on jets, pump position, access and care sits on the spa baths page, so only the outline is repeated here.
Which Decina bath suits which room
The ranges answer a few common rooms. For a small bathroom, the Cosmo is a 1300mm Japanese style soaking bath. The Natalia is a compact back to corner design, a space-saving option for smaller bathrooms and en suites. The Shenseki is a compact inset bath that maximises space and internal depth. For a larger room, the Duo is a classical oval for larger bathrooms and the Lago is a large rectangular bath with generous width. For a traditional look, the Regent and the Oxford have Hampton style panel and rim details. For a feature in the middle of the room, the Elisi, the Mintori and the Florencia can be freely located in the bathroom.
Size, depth and capacity
Decina baths here run from 1295mm to 1850mm long. Freestanding and back to wall baths are 730mm to 900mm wide, and the round Florencia and square Venice are 1400mm each way. Inner depth runs from 410mm on the Aurora to 490mm on the Lola, and the Bambino is 380mm deep. Capacity is measured 200mm below the rim on many Decina baths, not to the overflow. The figures run from 121 litres for the Prezzo 1500 to 290 litres for the Florencia. Compare capacity only between baths that use the same fill line.
Overflow, waste and plug
Most freestanding Decina baths have an integrated overflow, and the plug and waste are sold separately on many of them. The exceptions: the Aurora includes a matte white plug and waste with its integrated overflow, and the Alegra comes with an in-line waste connection with a built in connector pipe. The Angelique is sold without the plug and waste, and the Modena, Bambino and Fabrino suit a pop-down waste for safety and easier servicing. Australian building codes require a fully removable bath waste in some situations, so ask a plumber before buying. The bath wastes collection has the options. Waste position is centre on most freestanding and back to wall baths and at the end on the inset baths and the Caval.
Support, feet and frames
Support comes in three forms. Freestanding baths have adjustable self-supporting feet, often with an internal or full steel support frame, which levels the bath on an uneven floor. Inset baths have reinforced bases. The Bambino and Modena have a timber and fibreglass reinforced base, the Turin's base is reinforced with resin and fibreglass, and the spa baths have a steel rod reinforced rim and a double reinforced base. The third is the EZI Frame, a galvanised steel support frame with adjustable legs that Decina sells for specific baths and spa baths. Only two support methods suit a Decina bath, a full mortar bed or an EZI Frame, because scrap timber, bricks and foam do not support a bath structurally when it is full of water and bathers.
Installing a Decina bath
Installation is done through a local bathroom or plumbing professional. Each Decina bath comes with an installation instruction download, and several have a specification sheet. For a freestanding bath, plan the waste and supply first, check the floor, and level the bath on its feet. For an inset or island bath, plan the hob, the tile bead and the support. For a spa bath, plan access to the pump, and the electrical connection by a licensed electrician. A plumber should make the waste and tapware connections on any of them.
Cleaning and care
Acrylic baths can be cleaned with warm soapy water or a liquid polish. For a spa bath's pipework after bath oils, run cold water mixed with bicarbonate of soda through the system for fifteen minutes and then empty the bath. Decina publishes a separate product care and cleaning document for its baths. Use a soft sponge or microfibre cloth and a pH neutral cleaner, and avoid bleach, ammonia, abrasive powders and steel wool. A monthly look at the waste, overflow and silicone seals catches problems early.
Choosing a Decina bath
Choose the format first, then the size. A freestanding bath needs the clearance and a floor that can carry it, a back to wall or corner bath suits a smaller room, and an inset bath suits a tiled hob or a shower over the bath. Check the inner depth and the fill line for capacity, the overflow and waste, and the support method, and read the installation instructions before the tiler and plumber are booked. The full range of baths from every maker is on the bathtubs page.