What a hand held shower head is
A hand held shower head, also called a hand shower or a detachable or removable shower head, is a spray head on a flexible hose that rests in a cradle or bracket and lifts out so you can aim it. It does what a fixed head cannot: it rinses hair, bathes children or pets, cleans the recess, and lets you shower seated. It suits family bathrooms and anyone with reduced mobility, because the person aims the water instead of moving to meet it.
It can replace a fixed head directly, sit beside an overhead head through a diverter, or ride on a slide rail so the height adjusts. If you want a rail, see shower rails. If you want the overhead on its own, see shower roses. The full range sits in showers.
Are hand held shower heads worth it?
For most households, yes, and the reasons are practical. A hand shower gives you control. You point the water where it is needed, which helps families with children, people with mobility needs and anyone who has to clean the shower area. A hand shower asks a little more of you: you hold the head, and the hose is visible in the shower. Check the hose and joints now and then, as they are the parts that wear.
The choice follows from that. If you rinse, wash children or pets, or clean the recess often, the hand shower earns its place. If you shower alone, standing, and want your hands free, a fixed head with a hand shower beside it through a diverter gives you both. See twin shower heads for sets that do this.
How to choose a hand held shower head
Four things decide it: the hose, the bracket, the spray functions and your water pressure.
- Hose length and material
- Bracket or holder, and whether it comes in the box
- Spray functions
- Pressure and the WELS rating
Hose length and material
Hoses are typically 1.5 to 2 m long. A 1.5 m hose suits most bathrooms, and a 2 m hose suits larger showers, unusually high wall outlets and bath and shower combinations. Most hoses here are 1.5 m, and you can check the length in the specification. Choose a hose that reaches every part of the shower and resists kinking and corrosion, with a durable, flexible build. Stainless steel and reinforced PVC are the common materials, anti-tangle designs exist, and a smooth surface is easier to clean. Several products in this collection have a metal hose or an easy-clean smooth hose. After each shower, let the hose hang straight so it does not kink.
Take the hose seriously when you buy. A low-quality hose or connector can fail slowly. Moisture builds up behind the wall and shows later as paint bubbling, darkened grout and a larger repair. Check the hose connections by hand every few months, and replace a hose that has cracked or kinked.
Bracket, holder and what is in the box
A typical hand shower kit has three parts: the spray head, the flexible hose and a wall bracket that holds the head when it is not in use. Products here differ. Some include the hose and the bracket, some include the head alone, and some include a combined water inlet and bracket that fits onto an existing 1/2 inch inlet with no drilling. The Phoenix Nuage hand shower is an example. It fits the existing inlet, the handpiece angle adjusts, and the inlet and bracket are combined. Check the box contents line on each product to see which kind you are buying, because it decides what else you need to buy.
If you want the head to move up and down the wall, a slide rail does it without a new installation each time. See shower rails. If you are keeping a fixed head and adding a hand shower beside it, a diverter on the arm switches between the two or runs both. A handheld can replace the fixed head directly or sit beside an overhead head through a diverter valve. A diverter adds parts and installation time, so confirm the diverter setup to know whether one or both outlets can run at once.
Pressure, flow and WELS
A hand shower does not reduce water pressure by design. A drop in pressure after a swap usually comes from a flow restrictor, a kinked hose or a lower WELS rating than the old head. A head cannot raise mains pressure, so choose a handset designed for your pressure. Some handsets feel softer depending on the spray plate design and the flow controller. If your supply is low, look for a handset suited to low pressure, with a smaller face of about 100 to 150 mm, which concentrates the flow into a stronger stream. Many models are rated for an operating pressure of 150 to 500 kPa. A high-pressure style head works by changing the nozzle design to make a weak shower feel stronger, and smaller nozzles can scale faster in hard water, so keep them clean.
WELS runs from one star, the least efficient, to a top rating of 5 stars for showers. The flow at each level is on the label: 9 litres a minute at 3 star, 7.5 at 4 star and 6 at 5 star. Most quality hand showers rate 3 star at 9 litres a minute or less, and 3 star is the baseline minimum. The products here are rated 3 and 4 star, and you can check the flow in litres a minute in the specification. Where a set has two outlets, the label should show the rating and flow for both. Leave the flow restrictor in place, because it is part of what earns the rating, and look at pressure and product choice before removing it. Check that any hand shower you buy carries a WELS rating and WaterMark approval.
Water-saving claims need checking against the number. Marketing words like "water saving" can hide very different flow rates, so compare the litres a minute on the label.
Cleaning and caring for a hand shower
Rub the silicone nozzles with your finger or a soft cloth every week to lift mineral build-up before it sets. Limescale is the usual cause of a weak or uneven spray. For a deeper clean, soak the head in warm water with a few drops of mild dishwashing liquid for 30 to 60 minutes, scrub the nozzles with a soft toothbrush and rinse. Use a wooden toothpick for a single blocked hole, and never a metal needle. A detachable head can be removed and soaked in a basin, while a fixed one can be soaked in place in a bag held on with a rubber band. A minute of full flow afterwards clears the loosened scale.
The finish decides the cleaner. The coating on matte black, brushed gold, brushed nickel, gunmetal and other PVD finishes can be damaged by vinegar, baking soda, acid descalers and abrasive pads, so leave them off. The safe default is warm soapy water unless the product care line says otherwise. Avoid acetic acid, hydrochloric acid and chlorine bleach, and use a mild citric-acid cleaner for scale. Check the connections regularly, tighten them by hand, and check the hose and head for blockages. Clean the head about once a month, massage the nozzles when the spray weakens, and for heavy deposits soak it in plain warm water for an hour, never anything acidic. Keep vinegar, baking soda, bleach and coarse brushes off coated finishes such as brushed nickel and matte black.
Hand shower ranges in this collection
Choose the brand that matches your tapware, and the finish follows.
- Phoenix hand showers include the Nuage, Vivid, Vivid Slimline, Cromford, Lexi, Teva, Oxley, Ormond and Wiltern. The Oxley uses LuxeXP technology, which gives each water jet a swirling motion.
- Caroma hand showers include the Urbane II, Luna Multifunctional, Liano II, Contura II, Riviere and Tasman II.
- Meir hand showers are the Round range, on a fixed bracket or a swivel bracket, in one function and three function versions.
- Nero hand showers include the Opal, Mecca, Serenity and Air Hand Shower II, and the Zen in stainless steel with an outdoor hose.
- Fienza hand showers include the Kaya, Empire Slim and Isabella, with round or rectangular plates.
Seated showering and shared bathrooms
A hand shower is the right head for seated showering, because the user aims the water without standing. Put the bracket or the rail at a height the seated user can reach, and make sure the hose is long enough to reach the floor of the recess. Pair it with a shower seat in a recess that has no step.
For a fixed head with a hand shower beside it, check shower arms and shower heads so the two work together on the same wall.
Common questions about hand held shower heads
Can I fit a hand shower to my existing shower?
Yes, in most cases. Choose a kit with a combined inlet and bracket that fits the existing half inch connection, or fit a diverter to your current arm. Confirm the thread type first.
How long should the hose be?
A 1.5 metre hose suits most showers. Choose 2 metres for a larger recess, a high wall outlet or a bath and shower combination.
Do hand showers work with low pressure?
Many hand showers operate from 150kPa, and a head with a smaller face concentrates the flow when pressure is low. Have the plumber measure your pressure before you choose.
Finish and what to pair it with
Hand showers here come in chrome, brushed nickel, black, gold, bronze, brass, gunmetal, champagne and white. Match the finish to the mixer and the rest of the shower. See chrome showers, black showers, brushed nickel showers, brushed brass showers, gold showers, bronze showers and gunmetal showers. For the controls, see shower mixers. Some hand showers are built from stainless steel for outdoor use, to rinse off sand, chlorine or garden dirt; see outdoor showers. Outdoor plumbing can trigger drainage and backflow requirements, so check with a licensed plumber and your council.
If you already have tapware from one range, start from that brand's showers: Nero showers, Phoenix showers, Caroma showers, Fienza showers, Meir showers, Clark showers and Modern National showers.