Ambrose Cabinet Handles Buying Guide
The Ambrose is an aluminium range from Momo Handles with a bar pull and a 60mm T knob, both in a matte Antique Bronze. It is a routed bar with pronounced surface texturing, structured and bold, characterised by an accentuated grooved bar and knob. The page covers what each piece measures, what aluminium with a matte bronze finish is, which size suits a drawer or door, and how to fit and clean the range. For the whole brand, start at Momo cabinet handles.
The pieces, measured
The Ambrose bar pull comes in two sizes. The smaller is 195mm overall on a 160mm fixing distance, and the larger is 260mm overall on a 224mm fixing distance. The projection is 35mm. The fixing distance is the gap between the two screw holes, measured from centre to centre, so the 160mm pull runs 35mm longer than its holes and the 224mm pull 36mm longer. The T knob is 60mm long and also projects 35mm.
The T-pull has a foot width of 24mm, and standard 22mm handle screws are included. The bar pull's width, screw detail and finish process are not given. When you replace a handle, measure the distance between the screw holes and match it to the fixing distance, not to the length of the old handle. A 128mm handle will not fit 160mm holes without new holes, so an Ambrose pull only drops into holes spaced at 160mm or 224mm.
The product code AMB224 is how some buyers find the 224mm pull. The code is a trade convention and not a size, so match the size by its centre.
The grooved bar
The Ambrose is a modern routed bar design with pronounced surface texturing, an accentuated grooved bar and knob. Both descriptions point to a bar with a cut pattern along its length, and the depth and the spacing of the cut are not given. Knurling, a related idea, presses a pattern into a surface so that hands hold an object more securely. A grooved bar is not the same as a knurled one, so this page makes no claim about grip. Hold a sample to feel how the bar sits in the hand.
Aluminium in a handle
Aluminium has a density of 2.70 g/cm3, about a third that of steel, and a thin oxide layer protects the metal from further corrosion by oxygen, water or dilute acid. Corrosion resistance drops with aqueous salts and dissolved chlorides. Aluminium is the lightest option, significantly lighter than brass and zamac. Opinions on coastal use differ. Its oxide layer protects it from moisture, so it can be used outdoors in many conditions, yet aluminium handles can pit near water or in windy, humid areas, where brass or 316 stainless steel is the choice. Indoors, in a coastal house, an aluminium handle is a normal choice, while in a splash zone or outdoors by the sea the stronger materials are the safer call. See aluminium cabinet handles for the material in full.
Antique Bronze in a matte finish
The Ambrose finish is matte and the colour is Antique Bronze. A brushed metal look is possible, which conflicts with the name, so this page uses the name Antique Bronze. Bronze is an alloy of about 12.5 per cent tin and 87.5 per cent copper, dating from as early as 3000 BC. The Ambrose body is aluminium, so Antique Bronze is a colour and not a bronze alloy, and how the finish is made is not given. Treat it as a coated surface. See bronze cabinet handles for the family of bronze finishes.
Choosing a size
A sizing table helps. A standard drawer 450mm to 600mm wide takes a 128mm to 160mm centre, and a wide drawer of 600mm to 900mm takes 256mm to 320mm, or two 128mm pulls. A standard door takes a 96mm to 128mm pull or a knob, and a tall pantry door of 600mm and above takes two 256mm pulls. The one-third rule: a pull about a third as long as the drawer front is wide, so near 200mm for a drawer 600mm across. The 195mm Ambrose on a 160mm centre is nearly the exact size for that drawer, and the 260mm on a 224mm centre suits a drawer of about 780mm. The rule is a rule of thumb and not a strict rule.
A pull or knob sits 40mm to 60mm in from the edge that opens, near the bottom corner of an upper door and the top corner of a lower door. Pulls run horizontally on drawers and vertically on doors. To test a size before you buy, tape a strip cut to the handle's length onto the cabinet and live with it for a day.
The T knob
The 60mm T knob fixes at one point and gives a longer grip than a round knob. Knobs take the fingers and a single screw and suit small doors and drawers, while pulls take the whole hand. Most cabinet knobs run roughly 25mm to 38mm across, so the 60mm T knob is longer than a round knob. Drawers up to about 400mm take a knob, a short pull or a compact T-bar. The T knob is therefore the Ambrose piece for a small door or a narrow drawer. See cabinet knobs and cabinet pull handles.
Matching the Ambrose to the door style
Contemporary and minimalist kitchens go with matte black or brushed nickel pulls, and Shaker kitchens with cup pulls, bin pulls or knobs in brushed brass, antique bronze or matte black. Industrial kitchens go with gunmetal or matte black bar pulls with visible knurling, and heritage kitchens with antique bronze or aged brass and period knobs. The Ambrose in Antique Bronze sits in the Shaker and heritage notes, and the textured bar gives it a visible detail in the industrial direction. Gold, brass and bronze tones pair with navy, charcoal, blue or green cabinetry. These matches are guidance and not rules.
Matching tapware and appliances
Choose the handle finish after the tapware, sink and appliance finishes are settled. Use one dominant finish for the handles through a kitchen, with a second metal as an accent and two metals at most. Warm metals such as brass, gold and bronze work best with each other, and cool metals such as nickel, chrome and stainless steel work best with their own group, because mixing across the two is harder. Antique Bronze sits in the warm group, so it pairs with brass or bronze tapware. Coordinate finishes across cabinet hardware, appliance pulls and fixtures such as taps and lighting without making every piece identical. Brass pairs with painted Shaker cabinetry and with oak, walnut, marble and natural stone.
Reading the weight
Aluminium is the lightest of the common handle materials, so an Ambrose bar pull will weigh less than a brass pull of the same size. No weight is given for the Ambrose, so this page does not state one. If weight in the hand matters, a sample will tell you more than a figure, and designs where reduced weight improves usability suit aluminium best. Use screws of the right length for your panel: 22mm for panels 16mm to 18mm thick, and 38mm for panels 32mm to 34mm thick.
Hole layout and the bar pull
A bar pull needs two holes at the stated centre, and a T knob needs one. If you are moving from a pull to a T knob, you will leave one hole unused, and a filled hole shows unless the door is repainted. Match existing centres where you can. Where the old holes are on a centre the Ambrose does not offer, such as 128mm or 192mm, a different range may serve better.
Replacing handles
When you swap handles, match the fixing distance. A new pull with the same distance drops into the old holes without drilling. Measure from the centre of one screw hole to the centre of the other. Common centres such as 96, 128, 160, 192, 224 and 320mm are multiples of 32mm, and that handles made to imperial sizes will not match holes drilled on that grid. Both Ambrose centres sit on the grid. If the old holes are on another centre, you will need to fill them or drill new ones, and a filled hole shows unless the door is repainted. A T knob needs only one hole, so swapping a pull for a knob leaves one old hole unused and the other to fill.
In a bathroom
Bathroom fittings need wiping and drying more often than those elsewhere, because steam and moisture leave marks. Bathrooms are more humid than kitchens. The cabinets these handles fit are at bathroom vanities and furniture. A vanity door well away from the shower is a fair place for the T knob.
Caring for aluminium handles
Aluminium needs only simple cleaning. For coated finishes, use a soft microfibre cloth with mild soap and warm water if needed, dried promptly, and keep abrasive pads, powdered cleansers, ammonia, bleach and alcohol-based disinfectants away. Put the cleaner on the cloth and not on the hardware, and dry the handle straight away so water marks do not form. A coating wears first where the hand lands, so wipe the grip area more often than the rest of the handle.
The range is small, so the decision is short. Two bar pulls and one T knob, all in one finish, cover a drawer run and a few small doors. The 195mm pull fits drawers of about 450mm to 600mm, the 260mm pull fits wide drawers, and the T knob fits small doors and narrow drawers. If your kitchen needs a different finish, a longer pull or a round knob, the range will not cover it, and a sibling range from Momo cabinet handles may suit better.
Related pages
For the full brand, see Momo cabinet handles. For other types and materials, see cabinet handles, aluminium cabinet handles and cabinet knobs.