Phoenix shower mixers buying guide
A Phoenix shower mixer is a single lever mixer that sets the flow and the temperature of the shower, and often the bath as well. This page holds the Phoenix wall mixers, shower and bath diverter mixers, wall top assemblies, floor mounted bath mixers and wall basin and bath sets, across the Vivid Slimline, Axia, Mekko, Rush, Teel, Lexi MKII, Nostalgia and Cromford ranges, in chrome, brushed nickel, black, brass, gold and gunmetal. The guide below explains the types of mixer, how a two part concealed mixer is built, how to choose between wall, floor and diverter models, what to check when you are replacing a mixer, and how to look after it.
What a shower mixer does
A shower mixer is the control. It mixes the hot and the cold supply, and it sets the flow. The water then goes to a shower head, a hand shower, a bath spout, or two of them at once. The mixer does not decide how the water looks in the room. The shower head does that. What the mixer decides is how easily the temperature and the flow can be set, and how long it keeps working.
That is why the choice of the mixer deserves attention. It is built into the wall, so it is hard to change once the tiles are on. A shower mixer that is easy to use, easy to service and in a finish that matches the room is a decision you only want to make once. For the wider group from every brand, see shower mixers and shower and bath taps.
Wall mixers, diverter mixers and wall top assemblies
A wall mixer, or shower and wall mixer, has one lever and one outlet. It sends the water to the shower, and it suits a bathroom with a single shower and no bath. A shower and bath diverter mixer has a diverter, so the water can be sent to the shower head or to the bath spout. A diverter is the right choice for a shower over a bath, or for a shower with a hand shower and an overhead rose.
A wall top assembly is a different kind of fitting. It is a pair of handles or a handle and a body that sit on the wall above a bath or a basin, with the spout beside them, and it is the usual choice in a traditional room. See wall top assemblies for the group from all brands. A wall basin and bath mixer set pairs a mixer and a spout, so the water comes from the wall over the basin or the bath. See wall basin and bath mixer sets.
Floor mounted bath mixers
A floor mounted bath mixer stands on the floor beside a freestanding bath, with a spout that reaches over the rim. It is a mixer and a spout in one tall body, with the pipes coming up through the floor. It suits a freestanding bath in the middle of a room, where there is no wall to use. The position of the pipes has to be set before the floor is finished, so the bath position comes first. See freestanding bath mixers and bath fillers.
What SwitchMix is
SwitchMix is the name Phoenix uses for its two part concealed mixer. The rough-in body goes in the wall at the building stage, and the fit-off kit goes on at the end. The fit-off kit holds the handle, the plate and the cartridge. The two are sold separately, so the plumber can fit the body before the tiles go on, and the fit-off kit once the wall is finished.
That has two practical benefits. The first is that the finish can be chosen late, after the tiles, the vanity and the other fittings are decided. The second is that the trim can be changed later, if the new fit-off kit is made for the same body, without opening the wall. The Mekko and the Teel ranges here are SwitchMix mixers, so ask which of the other ranges take the system if that is the point of your choice. See Phoenix Mekko and Phoenix Teel.
The kit has to match the body. A fit-off kit says which rough-in it needs, and a body from one range may not take the trim of another. Give the plumber the full name of the range and the model when you order, so the right body and the right kit arrive together.
The ranges on this page
The Vivid Slimline is the largest group, with a slim lever and a clean body, in wall, diverter, floor and wall top forms. See Phoenix Vivid Slimline. The Axia is a modern range with wall, twin and shower and wall mixers, and see Phoenix Axia. The Rush has shower and bath and shower and wall mixers, and see Phoenix Rush. The Lexi MKII is a rounded range, and see Phoenix Lexi MKII.
Nostalgia and Cromford are the traditional ranges. Their shower sets have a lever or a cross handle, and they suit a classic room. See Phoenix Nostalgia and Phoenix Cromford. For the matching showers, rails and heads, see Phoenix showers.
Choosing the mixer for the shower
Start with how the shower is used. A single shower head needs a wall mixer. A shower and a bath need a diverter. A hand shower and an overhead rose need a diverter or a second outlet. Then choose the position, since the mixer should be reached from outside the spray, at a height that suits the people who use the shower. Check that the plate covers the wall opening around the body, and that the handle moves through its full range without touching a tile edge or a screen.
The question of the best mixer for a shower does not have a single answer. The better mixer is the one that suits the way you shower, the body that suits the wall and the finish that matches the room. The Phoenix ranges are all built for the same job, so you can choose by style and by function, and you do not have to give up either.
Replacing a shower mixer
A shower mixer can be changed, and it is not always easy. The mixer is fixed to a body in the wall, and the body decides what can be fitted. If the existing body is from the same range, the trim can usually be changed, and the new fit-off kit goes on the old body. If the body is from another range or an old fitting, the new mixer may need a new body, and that means opening the wall. Ask a licensed plumber to check the body first, and plan for a bigger job if it has to be replaced.
Before you order, find the name of the old range, take a photo of the old plate and the lever and measure the plate. That gives the plumber enough information to say what will fit.
Common mixer faults
Most faults in a shower mixer come from the cartridge. A lever that has become stiff, water that drips from the shower head when the mixer is off, a temperature that is hard to control, and a flow that has dropped without a change in the supply all point to the cartridge. A plumber can replace it, and will match it to the model. Have the range name and the finish ready, and the cartridge will be the right one.
A low flow can also come from a blocked shower head or a filter in the supply, so check those first. A shower mixer that is hard to turn is not always a cartridge fault either. Scale from hard water can build up in the cartridge. A plumber can clean it or replace it.
Finishes and materials
Chrome is the standard finish, the easiest to match and the simplest to clean. Brushed nickel is a soft silver that hides water marks. Black is a bold choice against white tiles, and it needs a wipe now and then. Brass and gold are warm finishes that suit timber, stone and brass fittings. Gunmetal is a deep grey. See Phoenix taps and Phoenix tapware for the full range.
Match the finish to the shower head, the rail, the towel rail and the handles. Most of the mixers are brass or lead free brass. Check the material and the compliance marks on the model you choose, and choose lead free brass where it is offered.
Water flow and installation
Taps sold in Australia carry a WELS rating for water efficiency. For a shower, the shower head sets most of the flow, so choose the mixer and the head together. Plumbing work has to be done by a licensed plumber, who fits the body at rough in, tests it and fits the trim at the end. The installation sheet supplied with each product is the reference for the connection and the fixings.
Care
Wipe the plate and the lever with a soft, damp cloth and mild soap, and dry them with a soft cloth to prevent water marks. Do not use abrasive pads, bleach or strong cleaners, because they can damage a brushed, black or coloured finish. Rinse soap and shampoo off the lever, since they leave a film. Hard water leaves scale on the plate and the shower head, and a soak in a mild cleaner will clear it.
Questions to settle before you order
- Do you need a wall mixer, a diverter mixer, a wall top assembly or a floor mixer?
- Has the plumber confirmed the rough in position and the body?
- Do you want a two part SwitchMix mixer, so the finish can be chosen late?
- Is this a new fit, or a replacement for an existing mixer?
- Which finish matches the shower head, the rail and the rest of the room?
- Will the mixer and the shower come from the same range?
Related pages
For the other Phoenix shower fittings, see Phoenix showers. For a tap from any brand, start at taps.