Skip to content

Stainless Steel Toilet Roll Holders

56 Items

There are no products matching your search

View all products

Stainless steel toilet roll holders buying guide

Stainless steel is the metal behind most of the toilet roll holders we sell, and the grade is what separates one holder from another more than the colour does. This page brings together stainless steel holders from Nero, Fienza, Caroma, Meir and Phoenix in every finish: black, white, chrome, brushed nickel, gunmetal, bronze, gold and brass. It also has the one holder in plain brushed stainless steel. Use it when material is your first question and finish is your second.

Why the grade matters

Stainless steel comes in grades, and two matter in a bathroom. Grade 304 is the everyday choice and suits a general home bathroom. Grade 316 adds molybdenum, which improves resistance to salt, so it is the grade to look at when the bathroom sits close to the coast or the air carries salt. The Nero Zen holders are the marine grade option, and they come in every colour. Not every range names its grade, so the table below separates the ranges that say 304, the ranges that say 316 and the ranges that say only stainless steel.

Grades by range

Grade stated Ranges
Marine grade 316 Phoenix Radii SS 316 (square plate, brushed stainless steel)
316L Nero Zen
304 Nero Mecca, New Mecca, Bianca, Classic, Dolce II, Mecca Double, Mecca Double with Shelf and the Mecca Care range; Caroma Liano II, Liano II Double and Liano II Spare; Meir Curvaé
Stainless steel, grade not stated Fienza Kaya, Kaya Double, Kaya Dual Purpose, Tono and Empire Slim; Phoenix Wiltern, Vivid MKII, Cromford and Gloss in the finishes that list stainless steel

If grade matters and a range does not state it, choose from the 316 and 304 rows.

The 316 options

The Phoenix Radii SS 316 square plate holder is marine grade 316 stainless steel in a brushed stainless steel finish. It is 162 mm long with a 78 mm projection and a twin screw mounting plate for a stable installation. The Nero Zen is 316L stainless steel with a PVD finish, 175 mm long with a 72 mm projection, an 18 mm holder diameter and a single fixed concealed bracket. Zen is offered in four finishes: brushed nickel, brushed gold, brushed bronze and graphite, all with the same 72 mm projection and 175 mm length. For a coastal bathroom, start with these two. The Radii SS 316 is the one holder here that keeps the steel colour itself, so it suits stainless steel taps and rails, while the Zen gives you the 316L grade in a coloured PVD finish.

The 304 ranges

Nero builds most of its holders from 304 stainless steel. The Bianca is 65 mm from the wall and 180 mm long. The Dolce II is 161 mm long with a 77 mm projection and a 46 mm round plate. The New Mecca is 160 mm wide and 106.5 mm high. The Mecca Double is 270 mm long with a 75.4 mm projection, and the Mecca Double with Shelf is 300 mm long with a 100 mm projection and a 100 mm height. Caroma uses 304 for the Liano II, with a 75 mm projection and 3 point fixing, and the Liano II Spare and Double carry the same grade. Meir uses 304 grade stainless steel on the Curvaé, which is 170 mm long, 64 mm deep and 29 mm high with a 125 mm hanging length and a dual wall fixing.

Stainless steel ranges with no grade stated

Fienza makes the Kaya, Tono and Empire Slim from stainless steel, and the Kaya is 158 mm long and 78 mm deep with a 4-point wall mount and fully concealed fixings that can face left or right. The Empire Slim is 171 mm long and 73 mm deep. The Tono is available with a glass shelf at 110 mm projection or as a 165 mm holder at 70 mm projection. Phoenix makes the Wiltern, Vivid MKII, Cromford and Gloss from stainless steel in some finishes: the Wiltern is 188 mm long with a 67 mm projection and a 50 mm round plate, and the Vivid MKII is 48 mm from the wall and 140 mm long.

Measurements by range

Holder Measurements
Phoenix Vivid MKII 48 mm projection, 140 mm long
Nero Bianca 65 mm projection, 180 mm long
Phoenix Wiltern 67 mm projection, 188 mm long, 50 mm round plate
Nero Zen 72 mm projection, 175 mm long, 18 mm holder diameter
Caroma Liano II 75 mm projection
Nero Dolce II 77 mm projection, 161 mm long, 46 mm round plate
Phoenix Radii SS 316 78 mm projection, 162 mm long
Nero New Mecca 160 mm wide, 106.5 mm high
Fienza Kaya 158 mm long, 78 mm deep, 55 mm plate
Meir Curvaé 170 mm long, 64 mm deep, 29 mm high, 125 mm hanging length
Fienza Empire Slim 171 mm long, 73 mm deep

Projection tells you how much clear wall the holder needs beside the pan. The Phoenix Vivid MKII is the shallowest, and the 316 options (Radii SS 316 at 78 mm and Zen at 72 mm) sit mid-range, so choosing the coastal grade does not force a deep holder.

Steel is the metal, the finish is the coating

The colour of a stainless steel holder is a coating on the steel. Chrome holders are electroplated or chromeplated, brushed nickel, gunmetal, bronze and gold holders are generally PVD, black holders are electroplated and white holders from Nero are powder coated. That means two holders in the same colour can be the same steel with a different coating, or a different steel with the same coating. Choose the grade from the table above, then use the finish pages to compare colours:

Forms in stainless steel

Every form on the site includes stainless steel. For two rolls on one fixing, see double toilet roll holders. Holders with a shelf, among them the Fienza Tono with its glass shelf and the Nero Bianca with shelf, are gathered on toilet roll holders with shelf. For a taller design, see spare toilet roll holders, where the Caroma Liano II Spare is 326 mm high with a 100 mm projection. The Fienza Kaya Dual Purpose is 265 mm long with a 226.5 mm hanging length and mounts left or right for hand towels, or vertically for toilet rolls.

Choosing by grade and by space

Two decisions come first. The first is the grade: pick 316 or 316L (Phoenix Radii SS 316 or Nero Zen) for a bathroom near the coast, and 304 for a general home bathroom, which covers most of the Nero, Caroma and Meir ranges. The second is the wall: compare projection and length in the table, because a double holder or a holder with a shelf stands out 100 mm or more while a plain single can stand out less than 50 mm. After that, choose the colour from the finish pages above, and the brand from your tapware, since ranges within a brand share a finish name.

When you replace a holder, take the old fixing spread, centre of one hole to centre of the other, and compare it with the new holder's. Check the facing too: the Fienza Kaya mounts left or right, which helps when the old fixings sit on the wrong side of the pan. A round plate such as the Phoenix Wiltern's 50 mm plate or the Nero Dolce II's 46 mm plate covers the wall around its fixings, and a bracket design such as the Fienza Empire Slim leaves more wall visible.

Nero Mecca Care for accessible bathrooms

Nero Mecca Care is 304 stainless steel throughout. The 450 mm grab rail with holder projects 88 mm and is rated at 150 kg, and its 32 mm rail is approved for standard AS 1428.1 requirements in DDA bathrooms. The heavy duty holder projects 80.5 mm, the 25 mm toilet roll rail comes in 300 mm and 450 mm lengths, and the add-on holder fits any modular 32 mm grab rail with a grub screw. Confirm the set-out against your project documents before you fix anything.

Fixing a stainless steel holder

The fixing differs by range: a twin screw mounting plate on the Phoenix Wiltern, Vivid MKII and Radii SS 316, 3 point fixing on the Caroma Liano II, a 4-point concealed wall mount on the Fienza Kaya, a dual wall fixing on the Meir Curvaé and a single fixed concealed bracket on the Nero Zen. Each holder comes with a fixing kit or install kit. Confirm what is behind the tile or plasterboard before you drill, and tape a spare roll in position to check the reach.

Stainless steel holders by brand

For the wider stainless steel range, see stainless steel bathroom accessories. Height and distance from the pan have their own guidance on the main toilet roll holders page.

Frequently Asked Questions

At what height should a toilet roll holder be installed?

The standard installation height for a toilet roll holder in Australia is approximately 650–700mm from the finished floor level, positioned to the side of the toilet at a comfortable reach. It should be installed 200–300mm in front of the toilet bowl. Always follow any specific recommendations from the manufacturer.

What type of toilet roll holder is best for a bathroom?

Toilet roll holders are available as recessed wall-mounted, surface-mounted (open arm or enclosed), and freestanding floor-standing options. Surface-mounted open arm holders are the most common in Australian bathrooms, they allow easy one-handed roll change. Recessed holders give a very clean, built-in look and suit minimalist bathrooms. Choose a holder in a finish that matches your other bathroom accessories for a coordinated result.

How do I match bathroom accessories to my tapware?

The simplest approach is to buy your accessories from the same brand range as your tapware, many brands such as Phoenix, Caroma Urbane II, and Meir offer coordinated tap and accessory collections. If mixing brands, focus on matching the finish (e.g. brushed nickel or matte black) rather than the exact product range. Small variations in tone between brands are often barely noticeable in a finished bathroom.

What bathroom accessories do I need for a complete bathroom?

A fully equipped bathroom typically includes a towel rail or heated towel rail, a toilet roll holder, a robe hook (or hooks), a soap dish or soap dispenser, and a toothbrush holder. In the shower, a shower shelf or niche is essential. For a cohesive look, choose all accessories from the same range and finish, most Australian accessory brands like Nero, Phoenix, Meir and Caroma offer complete coordinating sets.