Skip to content

Zinc Alloy Cabinet Handles

0 Items

Whoops, there are none available in your area

View all products

Zinc Alloy Cabinet Handles Buying Guide


Zinc alloy is the metal most cabinet handles are cast from. This page holds zinc alloy cabinet handles, also searched as zinc alloy handles, zinc alloy cabinet pulls, zinc alloy drawer handles and zinc alloy hardware, in D handles, bar handles, cup pulls, bow handles and knobs. The page explains what zinc alloy is, how it compares with aluminium and brass, what it does well, where it has limits, what the coating on the surface is and why it matters, and how to choose, fit and look after the handles. For handles in every material, start at cabinet handles.

What zinc alloy is

The alloy used for handles is usually called zamac, or Zamak. It is a family of zinc-based alloys, and the name comes from the German names of its metals: zinc, aluminium, magnesium and copper. It was developed by the New Jersey Zinc Company in 1929, and the most common grade, Zamak 3, is 96 per cent zinc and 4 per cent aluminium.

Zamac is a zinc-based alloy that includes aluminium, magnesium and copper, a lighter alternative to brass, durable and corrosion-resistant, suited to high-use settings, and able to keep a consistent finish. Zinc alloy is the most common base for cabinet handles and resists corrosion and moisture. The metal is common for a reason: it casts into detailed shapes, and one mould produces the same handle each time.

What the coating is, and why it matters

The finish on a zinc alloy handle is not decoration alone. Zinc itself does not rust, but die-cast zinc handles corrode badly outdoors, and the white rust and corrosion pits of uncoated zinc handles are not acceptable on a cabinet. The handles must have a corrosion-proof finish, whether plated or powder coated. Electroless nickel plating is one option, and anodised zinc die-castings are very corrosion resistant, though little anodising of zinc is done commercially. The practical point is simple: a zinc alloy handle is as good as its coating.

Finish processes differ by piece. The Momo Handles Dallas D Handle and the Momo Handles Fusion D Handle are electroplated, the Momo Handles Brooklyn D Handle is plated, and the Turner Hastings Tutto 160mm Pull Handle is electroplated. The alloy takes electroplating, wet painting and chromate conversion coating. A plated finish is a thin metal layer deposited on the zinc, and a painted or powder coated finish is a layer of colour over it. Each protects the metal underneath, and each can wear.

That is the one limit to keep in mind. A coating can wear at the places the hand touches most, so a handle used many times a day shows the base metal or a change of sheen at the grip first. That is normal wear and not a fault, and it is why the care section below stresses gentle cleaning. A seller of metal parts, whose article favours stainless steel, makes the same point from the other side: stainless steel is better for high-traffic areas and for marine or outdoor use. That article is marketing from a company that sells such parts, and it confuses zinc alloy with zinc-plated steel, so use it only for the direction of the advice. For stainless, see stainless steel cabinet handles.

Is zinc alloy good for kitchen handles?

For an indoor kitchen, bathroom, laundry or wardrobe, yes, provided the finish is sound. The strengths are clear: zinc alloy casts into detailed shapes, it keeps a consistent finish, it resists corrosion and moisture, and it is lighter than brass. The limits are clear too. The coating does the protecting, so it suits indoor use more than outdoor, and in a high-traffic, damp or salt-air setting a solid brass or stainless steel handle is the safer choice.

The call is simple. Use zinc alloy where you want a detailed shape, a wide range of finishes and a consistent match across a run of cabinets. Choose brass or stainless where the handle will be touched constantly with wet hands, or where the setting is coastal or outdoors.

The shapes, with real figures

Zinc alloy handles come in the full range of shapes. The fixing distance is the gap between the two screw holes, overall length is the full length of the handle, and projection is how far it stands off the door.

  • The Momo Handles Dallas D Handle is zinc alloy, 16mm to 20mm thick and 12mm wide, projecting 27mm. It comes in lengths from 104mm to 457mm, on fixing distances from 96mm to 448mm.
  • The Momo Handles Livorno D Handle is zinc alloy, projecting 28mm, in lengths from 130mm to 352mm on fixing distances from 96mm to 320mm.
  • The Momo Handles Fusion D Handle is zinc alloy, 12mm wide and projecting 31.5mm, in 180mm and 340mm lengths on 160mm and 320mm fixing distances.
  • The Momo Handles Brooklyn D Handle is zinc alloy, projecting 37mm, in 170mm, 330mm and 1065mm lengths. The longest is the outlier, a very long handle for a tall door.
  • The Momo Handles Barrington Bar Handle is zinc alloy, 179mm long on a 160mm hole centre, projecting 29mm.
  • The Momo Handles Florencia Cup Pull 64mm is zinc alloy, 104mm long, 29mm wide and 25mm deep, on a 64mm hole centre.
  • The Castella Century Handle is zinc alloy, in 109mm, 140mm and 174mm lengths on 96mm, 128mm and 160mm fixing distances, with a double screw fixing.
  • The Castella Windsor Handle is zinc alloy, 15mm thick, in 158mm and 190mm lengths on 128mm and 160mm fixing distances, projecting 32mm.
  • The Castella Corner Handle is zinc alloy, 21mm thick, in 144mm and 208mm lengths on 128mm and 192mm fixing distances, projecting 30mm.
  • The Castella Shaker 35mm Fluted Knob is zinc alloy, 35mm across, projecting 26mm, with one 22mm M4 screw.
  • The Turner Hastings Tutto 160mm Pull Handle is zinc alloy, 20mm thick, 195mm long and 27mm wide.
  • The Zanda Zurich Knurled T-Knob is zinc alloy, 90mm long and 13mm wide, projecting 34mm. The Zanda Mayfair Cabinet Knob 32mm is zinc alloy and 32mm across.

The list shows the point of the material. A D handle, a bar, a cup pull, a fluted knob and a knurled T-knob are very different shapes, and all are cast in the same alloy. For the shapes in other metals, see D shaped cabinet handles and cup pull cabinet handles.

Choosing a shape and a size

Knobs are gripped with the fingers, take a single screw, and suit small to medium doors and drawers and light use. Pulls are gripped with the whole hand and suit large or heavy doors and drawers and high-use areas, so larger cabinets generally suit pulls and smaller ones pair with knobs.

A widely used rule: a pull is about one third the width of the drawer front, so a drawer 600mm wide takes a pull of about 200mm. For fronts between roughly 450mm and 700mm wide, 128mm, 160mm or 224mm centres suit, and beyond that, 256mm or 320mm centres, or two pulls, suit better. Most cabinet knobs run roughly 25mm to 38mm across, so the 32mm Zanda knob and the 35mm Castella fluted knob sit inside that range.

The range of lengths in the list covers the whole job. The D handles run from small vanity sizes to long ones for wide drawers, and the Brooklyn goes much longer for a tall door. A narrow drawer looks best with a shorter handle, and a wide drawer needs a longer one or two. See cabinet pull handles and cabinet knobs for more.

Choosing a finish

Finishes group by style. Warm metals such as brushed brass suit traditional and transitional rooms, black is bold and modern, and nickel is cool and neutral. Zinc alloy takes all of them, because the finish is applied over the cast shape. The common finishes on this page are brass tones, brushed nickel, chrome, black, bronze and white.

One rule for combining metals: limit a room to two, repeat each at least twice so it reads as a choice, and carry the same finish through the house. Matching the handle to the tapware is the simplest way to follow it. For finishes, see brushed brass cabinet handles and black cabinet handles.

Choosing by room

Bathroom vanities suit the smaller sizes, in a finish chosen with the tapware. Wipe and dry bathroom fittings more often than those in other rooms, because steam and moisture leave marks, which is a reason to choose a well-finished handle there. See bathroom vanities and furniture for the cabinets they fit.

Kitchens suit the mid sizes on drawers and knobs on doors, and wardrobes and laundries suit the same. A tall door suits one of the long handles, and a pantry with heavy use is where a brass or stainless handle earns its place. Those are matches and not rules, and the best test is a sample held against the door.

Replacing handles, and fitting

If you are replacing existing handles, match the fixing distance. A new pull with the same distance goes into the old holes without drilling. Measure from the centre of one screw hole to the centre of the other, not from the edge of the handle. The fixing distances on this page include 64mm, 96mm, 128mm, 160mm, 192mm and more, so there is a size for most existing holes.

Check the screws too. Screw length follows panel thickness: a 22mm screw for panels 16mm to 18mm thick, and a 38mm screw for panels 32mm to 34mm thick. The Castella pieces come with 22mm screws. A screw needs to bite into the handle and stop short of the door face.

Caring for zinc alloy handles

Care protects the coating. Wipe with a soft, dry cloth, and avoid abrasive cleaners or harsh chemicals. The cleaner goes on the cloth and not on the hardware, the handle should be dried immediately to prevent water marks, and bathroom fittings need wiping more often.

Related pages

For handles in every material, see cabinet handles. For other metals, see solid brass cabinet handles, aluminium cabinet handles and stainless steel cabinet handles. For the makers on this page, see Momo Handles kitchen and bathroom handles and Castella cabinet handles.

Frequently Asked Questions

Why is zinc alloy used for cabinet handles?

Zinc alloy is a die-cast metal, usually zinc combined with small amounts of other metals like aluminium and copper, formed under pressure into detailed shapes. It's one of the most common materials for cabinet hardware because it casts cleanly into consistent, sharp-edged profiles at a lower cost than machining solid metal, then takes a plated or powder-coated finish well.

How does zinc alloy compare to solid brass for cabinet handles?

Solid brass is machined or cast from brass throughout, so any wear or a chip reveals the same metal underneath. Zinc alloy is die-cast, and the finish (plated, coated or powder-coated) sits on the surface rather than running through the material. For a project where the handle being solid metal end to end isn't the priority, zinc alloy is a practical choice; see solid brass cabinet handles if you specifically want the solid material.

Is zinc alloy different to aluminium cabinet hardware?

Yes. Aluminium handles are typically extruded or machined from aluminium, a lighter metal with its own natural corrosion resistance, and are covered in our aluminium cabinet handles range. Zinc alloy is a heavier, denser die-cast material that's better suited to fine detail and finely shaped profiles, since it flows into a mould more precisely than aluminium extrusion allows. Neither is inherently better; they suit different manufacturing methods and design details.

Is zinc alloy hardware durable enough for a bathroom or laundry?

A quality plated or powder-coated finish over zinc alloy generally holds up well in normal household humidity, the same as most coated metal hardware. As with any cabinet hardware in a wet area, the finish and coating quality matter more than the base material alone, so a well-finished zinc alloy handle can outlast a poorly coated one in a different metal. Checking the specific finish's suitability for wet areas before buying is worth doing regardless of base material.

How is zinc alloy hardware made?

Zinc alloy is die-cast into a mould, a faster, less labour-intensive process than machining or hand-finishing solid brass or stainless steel, and it uses less raw metal by volume for a similar finished shape. That doesn't necessarily mean lower quality for the intended use, which is why zinc alloy is common across hardware ranges.

What finishes are available on zinc alloy cabinet handles?

Zinc alloy takes plated and powder-coated finishes well, so it's commonly available in the same finish range as other cabinet hardware, including matte black, brushed nickel, brushed brass and chrome. Matching the finish to your tapware and other fittings matters more for a cohesive result than the base material, so check the cabinet handles hub for the full finish-matching guide.