Woodgrain ceiling fans buying guide
A woodgrain ceiling fan is a fan with blades that look like timber. People searching for wood, wooden or timber ceiling fans are usually asking two things first: is it real wood, and is a wooden fan any good? On nearly every fan in this collection the blade material is ABS plastic, steel and ABS, or aluminium. The wood is a finish. One range, the Fanco Wynd V3, has solid timber blades. This guide explains what that means and how the wood-look ranges compare. It then goes through size, light, motor and ceiling, and ends with installation and care.
Is a woodgrain fan real wood?
Mostly not. Many blades that look like wood are plastic, and the specification of each fan in this collection gives the blade material. Wood-look blades are engineered materials that resist warping, moisture and fading, and solid timber is the premium indoor option. The Eglo Seacliff, Cabarita and Noosa have ABS blades, as does the Surf, and some are UV resistant. The Eglo Surf has aluminium on some sizes. The Martec ranges have steel with ABS blades, and the Albatross II has aluminium blades. The Fanco Wynd V3 has solid timber blades, and the Fanco Breeze has ABS. If the material matters to you, the blade line is the one to read.
One note for sunny rooms: standard ABS can become brittle or yellow with prolonged heat and UV exposure unless it is UV-stabilised. Where a fan is UV resistant, it is marked on the product page, and where it is not, ask us.
Wood looks and finishes
Wood-look tones run from light oak, walnut, koa and beechwood to natural timber. They suit Scandinavian, coastal, contemporary, modern and traditional rooms, and they pair with wooden floors and neutral palettes. A light timber tone brightens a room and a darker walnut tone anchors it. Hold the tone up against the floor and the furniture, because mismatched wood tones can clash. A white body with wood-look blades blends into a light ceiling while the blades bring a natural note. Colour makes no difference to how much air a fan moves.
For individual finishes see oak ceiling fans, walnut ceiling fans and bamboo ceiling fans, and for body colours white ceiling fans.
Woodgrain fans by range
- Eglo Seacliff, 44 and 52 inch: DC at 16 and 28 watts, with UV-resistant ABS blades. It suits flat ceilings only, has a drop of 234mm to 258mm and is for indoor use.
- Eglo Surf, 40 to 72 inch: DC, 40 watts on the ABS sizes and aluminium blades on the others, 15 to 20 degrees of pitch, with the ABS sizes suited to indoors or covered outdoor areas not exposed to the weather.
- Eglo Noosa, 52 and 60 inch: DC at 24 and 38 watts, with 8 degrees of pitch. It suits indoor or enclosed alfresco areas not exposed to the weather.
- Eglo Iluka and Cabarita: DC, 13 degrees of pitch, with the Iluka offered in a low version of about 252mm and a standard version of 338mm, and the Cabarita at 50 inch and 35 watts.
- Martec Albatross II, Avoca, Elite, Hampton, Impact, Metro, Newport, Polo and Seaforth: DC, with steel and ABS or aluminium blades. Pitch runs from 10 to 15 degrees, except on the flat-only Metro and Albatross II.
- Fanco Wynd V3, 54 inch: solid timber blades, DC, 28 watts, 14,782 cubic metres an hour, 14 degrees.
- Fanco Breeze, 48 and 52 inch: AC with three speeds and ABS blades. Airflow is 9,030 cubic metres an hour and the pitch is 15 degrees.
Several Martec ranges have their own pages: Albatross II and Metro, Polo and Hampton, and Elite.
Choosing the size
A 52 inch (132cm) fan is the standard size, 48 inch suits smaller rooms and over 54 inch (137cm) suits larger square rooms of about 5 by 5 metres or more. By area, 6 to 12 square metres pairs with 48 to 52 inch, 12 to 20 square metres with 52 to 60 inch, and over 20 square metres with 60 inch and larger. The 40 to 48 inch fans suit a small room. The 52 inch fans suit a bedroom or standard living room. The 60 and 72 inch fans suit a larger room or open living area. A long room does better with several 52 inch fans than one very large fan. See large fans and small fans.
Ceiling height and pitch
Blades must hang at least 2.1 metres above the floor, and 2.3 to 2.7 metres is the recommended mounting height. The heights run from 210mm on the Metro and 234mm on the Seacliff to 338mm on the Iluka and 350mm on the Albatross II with a light. Arithmetic from those figures: on a 2.4 metre ceiling the lowest fans leave the blades at about 2.18 metres and the tallest at about 2.05 metres, so the tallest need a ceiling of about 2.5 metres or more. The electrician should confirm the figures. The Seacliff, Metro and Albatross II are 0 degrees, so they need flat ceilings. The others take 8 to 20 degrees. Fans generally handle about 10 degrees of tilt without a kit. See low profile fans and ceiling fans for high ceilings.
With a light or without
The wood-look fans come with and without a light, so wooden ceiling fans without lights are available. The lit versions use LED with adjustable colour temperature on many ranges. Warm white of about 2700K to 3000K suits bedrooms and lounges and neutral white of about 4000K suits task areas. A fan light near downlights can cause a strobe effect as the blades pass in front of them, and many models are sold as light or no-light versions only, so decide before you buy. A light adds height, so check the figure for the version you buy. See ceiling fans with lights and ceiling fans without lights.
DC motor, speeds and controls
DC motors are now the most common type and are more efficient than AC. They offer up to seven speeds and work on a normal supply through an internal rectifier. DC fans use less electricity than AC on average. Most of the wood-look ranges here are DC, and the Fanco Breeze is the AC option with three speeds. Most come with a remote, with Wi-Fi and app control on many and sleep and breeze modes on several. Pull cords, wall switches, remotes and apps are the usual options. See DC motor fans and smart ceiling fans.
Are 3 or 4 blades better?
Blade count is not a factor in performance, and high-performing fans have two, three or four blades. Fewer blades move air faster and more blades are often quieter. Judging by the airflow figure and the size is more reliable than counting blades.
Indoor, covered and outdoor use
Most of these fans are for indoor use. The Eglo Surf and Noosa suit indoors or covered outdoor areas not exposed to the weather. Covered does not mean dry. Sideways rain and sea air can reach a fan near the edge of a roof, and so can mist, and timber-look blades suit indoor rooms. For outdoor placement see outdoor ceiling fans.
Installation and care
A hard-wired ceiling fan must be installed by a licensed electrician, and wall-switch fans cannot legally be fitted without one. Wipe the blades every few weeks, and check the care notes before using a cleaner, especially on a timber blade. A fan that wobbles is louder and less efficient, and a balance kit corrects it.
Wood, weight and fixing
Wood is heavier than plastic, so a wooden blade puts more load on the motor and the fixing. A solid timber blade, plywood blade or composite blade each have different weight and stability, and plywood or laminated wood is more stable than solid timber. The Fanco Wynd V3 has solid timber blades, and the Eglo Waikiki and Martec Link have plywood in other collections. The electrician checks that the ceiling support can carry the weight and the movement of the fan. A fan that wobbles is louder and wears faster, so a firm fixing and a balance kit are worth the trouble on any blade type.
Humidity and where timber looks work best
Timber suits rooms with stable humidity, and moisture is what warps it. Living rooms and bedrooms are the usual places, along with studies and dry covered areas. Bathrooms, laundries and open outdoor areas are poor matches for real timber, which is why the plastic and aluminium wood-look blades exist. A fan with ABS or aluminium blades carries the look without the movement. If the room is humid, ask for a fan with a damp or covered rating, and use extraction in a bathroom. See bathroom exhaust fans for moisture removal.
Cleaning timber-look blades
Wipe the blades with a soft dry or slightly damp cloth, and avoid soaking a timber blade, since moisture is what damages it. Check the care notes for the model before using a cleaning spray, because some finishes mark. Dust collects on the top of the blades, and a ladder or a long-handled duster reaches it on a high ceiling. A balanced fan collects less dust unevenly and runs more quietly.
Short answers on woodgrain fans
- Is the wood real? On most, no. The blade line says ABS, steel and ABS, or aluminium. Only the Wynd V3 lists solid timber.
- Are wooden fans quiet? Real timber runs quietly, and a DC motor is the quieter type either way.
- Do wooden fans move less air? Blade material alone does not decide it, so compare the airflow figure.
- Can a wood-look fan go on a patio? Some suit covered areas not exposed to the weather, and timber blades are poor in damp.
- Is there a version without a light? Yes, the ranges are sold with and without.
Related collections
For every style see ceiling fans. By brand, Martec ceiling fans and Fanco ceiling fans.