Pill shape basins buying guide
A pill basin is an elongated oval, a long, soft shape that suits a narrow bench and a curved mirror. This page holds pill and long oval basins from Caroma, ADP, Otti, Timberline, Eight Quarters, Turner Hastings, Fienza, Kaskade and Bao. They are above counter, under counter, inset and wall hung, in ceramic, concrete, stone composite and solid surface, from a 400mm mini pod to basins 600mm long. The guide below covers what makes a pill, how it differs from an oval, the models by mounting type, and four things people ask: the standard vanity height, what a basin on a vanity is, the standard waste size, and what semi-inset means.
What a pill basin is
A pill-shaped basin is an elongated oval, and the shape gives a softer, fluid look for modern bathrooms with rounded mirrors and curved vanity edges. Pill, oval and long oval describe the same family, and oval basins soften the edges and straight lines of countertops and tiles. What separates a pill from a round basin is the length: a pill is long and narrow, so it suits a narrow bench or a vanity where depth is limited, and it gives a wide hand-washing area in a short projection. Rectangular basins often give more usable bowl space and oval basins can suit smaller rooms, which is the trade-off for the pill. See oval and rectangular basins to compare.
Above counter pill basins
An above counter pill sits on the bench with the whole bowl showing. The Caroma Liano II 530mm pill is 530mm by 350mm and 120mm high, holding about 11.9 litres. The Caroma Contura II 530mm basin is 530mm by 360mm and 175mm high overall, 120mm above the bench, holding 9.2 litres. The ADP Marilyn is 550mm by 350mm and 100mm high, holding 10.5 litres, and the ADP Norma concrete is 550mm by 350mm and 110mm high, holding 11 litres. The ADP Patty is 450mm by 280mm and holds 8 litres, and the ADP Werri is 530mm by 380mm and holds 7 litres. The Bao Pill is 500mm by 370mm and 135mm high with a large 21 litre bowl. The Timberline Myrtle is a 550mm by 360mm pill, and the Timberline Feather is an oval with a shallow bowl. The Mini Pod from Eight Quarters is a 400mm by 280mm mini oval, 120mm high, holding 7.5 litres, in concrete and terrazzo. The Fienza Jada pill is 600mm by 280mm and 120mm high in concrete. The Otti Bronte is 500mm by 350mm and 130mm high, holding 12.5 litres. The Kaskade Lucia is a 600mm by 320mm stone oval holding 17 litres. See above counter basins.
Under counter and inset pills
An under counter pill sits below the bench, so the bench edge frames the bowl. The Caroma Contura II undercounter is 580mm by 410mm and 180mm high. The Caroma Liano II 580mm pill is an under or over counter basin, 580mm by 330mm and 125mm high without an overflow. The Turner Hastings Narva is 570mm by 390mm, and the Fino is 550mm by 410mm. The ADP Carrie, Sincerity and Oval are under counter ovals, and several include an overflow. An inset pill drops into the bench: the Caroma Liano II 530mm and the Contura II 530mm are inset pills, and the Riviere comes as an inset with no tap hole, one tap hole or three. An under counter basin suits a stone, engineered stone or solid timber benchtop and not laminate. See undermount and inset basins.
Wall hung pills
A wall hung pill is a hand basin or a longer shelf basin. The Caroma Liano II hand wall basin is 530mm by 280mm and 130mm deep, holding about 2.7 litres, with one tap hole. The Contura II hand wall basin is 530mm by 300mm, and the Riviere hand wall basin holds 5.2 litres. The Caroma Opal range adds wall basins at 550mm, 720mm, 900mm and 920mm. A wall hung basin needs fixing to a support beam or noggins behind the wall sheeting. The Caroma hand wall basins use a D.200 fixing kit that bolts to the finished wall and a 40mm trap. A wall hung basin needs a visible bottle trap and concealed pipework planned before installation. See wall hung and small hand basins.
Pill basins and vanity width
People ask what size pill basin suits a 900mm vanity. Many oval basins are designed to fit standard vanity widths of 600mm, 800mm and 900mm, so check the basin width and the installation type against your vanity. Standard widths are 600mm, 750mm, 900mm, 1200mm, 1500mm and 1800mm, powder room vanities run 450mm to 600mm wide, and a practical minimum for a double basin is 1500mm. On a 900mm vanity, a pill of 530mm to 600mm leaves bench either side, and a 500mm pill leaves more. On a 600mm vanity, a pill of about 450mm to 500mm is the more realistic fit, such as the 450mm by 280mm ADP Patty or the 400mm by 280mm Mini Pod, since a longer basin leaves little bench. A basin that is shorter than the vanity leaves the bench for a soap dish and a mixer, so check the lengths.
What semi-inset means
People ask what a semi-inset basin means. A semi-inset basin is set partly into the bench, with some of the bowl above it. Some of the basin sits above the counter for a modern look, and the ADP semi-inset basins sit from 40mm to 50mm above the bench. A semi-inset basin sits slightly higher above the countertop than a semi-recessed one, and its rim attracts dust and grime, so it needs regular cleaning. The pill versions on this page include the ADP Ozera and the ADP Rise. See semi-recessed basins.
What a basin on a vanity is
People ask what a basin on a vanity is. A basin is the bowl that holds the water, and a sink is the whole appliance, with the basin, the taps, a plugged drain connected through a trap and a support such as a cabinet or countertop. On a vanity, the basin is the bowl that is set on or into the vanity top, or built into it. In Australia, basin, bathroom sink and wash basin are used interchangeably. See bathroom vanities.
The standard waste size
People ask for the standard sink waste size in Australia, and two sizes are in use, not a single standard. The Caroma Contura II and Liano II basins have a 40mm waste or trap connection, and many other basins here, including the Otti, ADP, Bao, Kaskade and Eight Quarters basins, have a 32mm waste. Wastes are sold in 32mm and 40mm, and the split is a trade convention and not a rule. A 32mm to 40mm adaptor exists, and the ceramic pop-up wastes from Eight Quarters have a 32mm outlet with a 40mm adaptor. A basin with an overflow needs a waste made for an overflow and one without needs a non-overflow waste. For the code answer, ask a licensed plumber who works to AS/NZS 3500.2. Check the waste size of each basin. See basin wastes.
Tap holes and tapware
Most pill basins here have no tap hole, so the mixer sits on the bench or the wall. A few have one, including the hand wall basins, and the Riviere comes with one or three. The tap has to clear the rim on an above counter pill. The Contura II basin mixer has a height to spout of 108mm, which is lower than the 120mm the Contura II above counter basin stands above the bench, so the tower mixer at 222mm or a wall mixer is the match there. The Kaya tall basin mixer has a spout height of 216mm and a reach of 170mm, and the Empire Slim tall basin mixer a spout height of 244mm and a reach of 180mm. A pill basin is long and narrow, so the spout should sit over the drain, which is usually at the centre of the length. A spout that is too short makes the water miss the centre of the basin, and one that is too long looks unbalanced. Choose the tapware before the bench is drilled. See basin mixers.
Materials
Most pill basins are ceramic. The ADP Norma and the Fienza Jada are concrete, the Kaskade basins are stone composite, the Turner Hastings Narva is a mineral composite, and the ADP Sincerity and Ozera and the Otti Noosa are solid surface. See ceramic, concrete, stone and solid surface basins. A fluted pill adds ribbing, and textured and fluted basins take more cleaning. See fluted basins.
Care
For ceramic, use a soft cloth and a mild household detergent or warm, soapy water. Vinegar removes limescale, and cream cleaners can dull ceramic if overused. Harsh chemicals such as Domestos destroy chrome and can damage the rubber seals in wastes, and a scratch in glazed ceramic cannot be repaired. For concrete, use a mild non-abrasive cleaner and avoid scouring pads, bleach and boiling water, and for solid surface use warm soapy water with no metal scourers or harsh cleaners. Pill basins are non-porous and simple to clean, so wipe the bowl and the base after use, and keep the sealant joint at the bench clean and unbroken.
Choosing a pill basin
- Choose the mounting type for the bench and the length for the vanity, with room behind the bowl for the mixer.
- Choose the material and the finish with the vanity and the mirror.
- Choose a mixer whose spout clears the rim and sits over the drain, or a wall mixer.
- Read the overflow and waste size lines, and add the waste that matches.
- Follow the instructions for the sealant, and have a licensed plumber make the connections.
- Check the plumbing positions against the product before it is fixed.
- Inspect the glaze and the rim for chips before the basin is fitted, since a chip is hard to repair once the basin is in place.
See matte white and white basins for the finishes, and bathroom basins for every other shape, mounting type and colour. For the makers, see Caroma Liano II, Caroma Contura II, ADP, Otti, Timberline, Fienza, Kaskade and Bao.